PRO-JECT Debut Carbon EVO
€599.00
SPECIAL OFFER
PRO-JECT Debut III DC OM5e
PROJECT Debut III DC OM5e.
Its construction and characteristics make it an effective turntable, an excellent value for money and above all a reliable turntable, designed to last for many years. Includes an Ortofon OM5E capsule.
Product not available.
€249.00
€319.00
- €70.00
Have you seen it cheaper? Contact us
Bankwire payment (3% DTO)
If you choose Bankwire payment you will get a 3% discount on your order.
Shipping Policy
Return policy
The Project Debut III turntable body is made of MDF and available in matte black. The platter is made of aluminum and has a weight of 1.3Kg. The motor is decoupled from the unit to reduce vibrations as much as possible and that these do not affect the sound reproduction. The turntable rests on four legs that are also responsible for reducing resonances. Compatible with LPs and singles, this is a manual turntable that to change the speed it will be necessary to perform a simple operation such as raising the platter and changing the belt from high (45rpm) to low (33rpm). It includes a methacrylate lid that will allow it not to get more dirty than necessary and that will protect the Debut III from any small blow that we can give it. The arm is made of one-piece aluminum and has a length of 8.6 inches or 218.5mm. For safe transport, the Project Debut III turntable is supplied disassembled. The assembly and calibration of the same are very simple since you only have to remove two screws from the motor, put the belt and adjust the weight of the arm. The video that appears at the end of this product sheet can be of great help to you, in red there is a Project turntable that although it is not exactly the same model, you have to do the same steps. And if you have any questions, we are here to help you!
Technical characteristics:
Capsule Model: Ortofon OM 5E
Capsule Type: MM
Platter Speeds: 33/45
Includes methacrylate cap
8.6 Inch Project Arm - 218.5mm Length
Effective arm weight: 9.5 Kg
Supplied weight: regulation from 3.5 to 5.5 grams
Support force of 10-30mN
Speed variation + - 0.8%
Wow and flutter: +/- 0.12%
Signal Noise - 65dB
Platter of 1.3 Kg weight
280mm diameter platter
16V / 500mA AC output voltage
Consumption 2W
Standard cable length - 110cm
Depth with lid open 405mm
Height with lid open 370mm
Dimensions with the lid open width 415 x Height 370 x Depth 405mm Dimensions with the lid closed width 415 x Height 118 x Depth 320 mm
5024000001
You might also like
PRO-JECT Juke Box E
€399.00
€569.00
Bank transfer (3% OFF)
If you pay by bank transfer you will get an extra 3% discount on your order.
For personalized advice contact us without any commitment.
