Turntables accessories Audiotechnica

AUDIOTECHNICA ATN3600LC: Conical Replacement Stylus for Turntables

New

Stylus replacement

AUDIOTECHNICA ATN3600LC

0.6 mil conical replacement needle for the AT3600L cartridge. Evolution of the ATN3600L: same reliable and easy approach, with updated design Tapered profile: stable and tolerant reading with less than perfect settings Support force: 3.0–4.0 g (typical 3.5 g) Estimated life: 300–500 h Compatible with Audio-Technica turntables type AT-LP60/LP60X,...

AUDIOTECHNICA ATN91: Replacement Needle for ATN91

New

Stylus replacement

AUDIOTECHNICA ATN91

Audiotechnica

€16.53

Original replacement needle for the AT91 capsule (direct replacement). Also compatible with discontinued CN5625AL and AT90 capsules Can be used as a replacement for AT3600L only if the arm allows VTF adjustment VTF with AT3600L + ATN91: 2g (important) Not recommended as an “upgrade” from ATN3600L if the arm does not allow support force adjustment

AUDIOTECHNICA ATN91R: Replacement Needle for ATN91R

New

Stylus replacement

AUDIOTECHNICA ATN91R

Audiotechnica

€20.66

Original replacement needle for the AT91R cartridge. 0.6 mil glued taper tip: stable tracking and easy use Aluminum alloy tube cantilever: light and strong Compatibility: AT91R and CN5625AL

AUDIOTECHNICA ATN81CP: Elliptical Replacement Stylus

New

Stylus replacement

AUDIOTECHNICA ATN85EP

Audiotechnica

€23.14

0.3 × 0.7 mil elliptical replacement needle for more precise reading and good detail. Compatible with capsules: AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD VTF: 1.0–1.5 g (recommended 1.25 g) Cantilever: aluminum tube VTA: 20°

AUDIOTECHNICA ATN3600LE: Conical Replacement Stylus for Turntables

New

Stylus replacement

AUDIOTECHNICA ATN3600LE

Audiotechnica

€23.97

Elliptical replacement stylus for the AT3600L cartridge. 0.3 × 0.7 mil tip (bonded): more detail and better reading of the groove than a conical one (ATN3600L/LC) Direct and simple upgrade for turntables type AT-LP60/LP60X, AT-LP2D, AT-PL300/PL50, AT-SB727/AT-SB2022, AT-LPGO BT Support force: 3.0–4.0 g (typical 3.5 g) Estimated life: ≈300 h

New

Stylus replacement

AUDIOTECHNICA ATN81CP

Audiotechnica

€23.97

0.3 × 0.7 mil elliptical replacement needle to recover clarity and detail with good tracking. Compatible with capsules: AT81CP, AT300P, AT3482, AT3482H/U, AT3482P, AT90CD VTF: 1.0–1.5 g (recommended 1.25 g) Cantilever: aluminum tube VTA: 20°

AUDIOTECHNICA AT-HS6. AT-HS6 headshell holder for 1/2" mounting

New

Cartridge Holders

AUDIOTECHNICA AT-HS6

Audiotechnica

€23.97

AT-HS6 headshell holder for 1/2" mounting. 4-pin bayonet connector (Audio-Technica / Technics / SME standard) Die-cast aluminum metal body Integrated finger lift Rubber washer for firm fit to the arm Color-coded 4-wire cables/terminals included Hardware included: 10 mm + 8 mm screws, M2.6 nuts with plastic washer

AUDIOTECHNICA ATN95E: Replacement Needle for AT95E

New

Stylus replacement

AUDIOTECHNICA ATN95E

Audiotechnica

€24.79

Original replacement needle for the AT95E cartridge. Direct replacement to replace a worn needle and restore reading performance Compatibility: AT95E, AT95 and AT93

AUDIOTECHNICA AT-HS4. Universal cartridge holder for 1/2" mounting

New

Cartridge Holders

AUDIOTECHNICA AT-HS3

Audiotechnica

€26.45

AT-HS3 detachable cartridge holder/head for easy capsule replacement or upgrading. 1/2" mount and arm with 4-pin connector Lightweight cast aluminium, red finish Angled design, ideal for straight arms (e.g. AT-LP3) Integrated finger lift for precise stylus handling Includes terminal cables

AUDIOTECHNICA AT-HS4. Universal 1/2" Cartridge Holder

New

Cartridge Holders

AUDIOTECHNICA AT-HS4

Audiotechnica

€26.45

AT-HS4 universal capsule holder for 1/2" mounting. Compatible with bayonet arms / 4-pin connector Ultra-light die-cast aluminium to reduce vibrations Angled design, ideal for straight arms Integrated finger lift / manual lift for precise needle placement Includes: terminal cables + screws (10 mm and 8 mm), nuts and plastic washers

AUDIOTECHNICA ATN95EX: Replacement Needle for AT95EX

New

Stylus replacement

AUDIOTECHNICA ATN95EX

Audiotechnica

€28.93

Specific replacement needle for the AT95EX cartridge. Elliptical diamond tip with bonded round shank for accurate reading and more detail than a conical

AUDIOTECHNICA AT-VMN95C: Replacement Needle for VM95 Series

New

Stylus replacement

AUDIOTECHNICA AT-VMN95C

Audiotechnica

€28.93

Replacement conical stylus for Audio-Technica VM95 Series cartridges (all VMN95 are compatible with each other). Quick and economical replacement without changing the entire capsule Aluminum + diamond bonded cantilever with round shank (robust for daily use)

AUDIOTECHNICA AT-VMN95E: Replacement Needle for VM95 Series

New

Stylus replacement

AUDIOTECHNICA AT-VMN95E

Audiotechnica

€28.93

Replacement elliptical stylus for Audio-Technica VM95 Series cartridges (all VMN95 are compatible with each other). Clear vs. Tapered Improvement: More detail, definition, and more accurate groove reading Aluminum + elliptical diamond bonded cantilever with round shank (reliable and easy to use)

AUDIOTECHNICA AT-LT13A. Adjustable Aluminium Cartridge Holder

New

Cartridge Holders

AUDIOTECHNICA AT-LT13A

Audiotechnica

€40.50

AT-LT13A adjustable head/capsule holder made of cast aluminium. Threaded body: capsule mounting without nuts Adjustments: adjustable suspension and azimuth for fine alignment Cabling included: quad cable with gold-plated terminals Screws: 7 pairs of screws (3/5/6/8/10/12/14 mm)

AUDIOTECHNICA AT-VMN95SP. Replacement Stylus for AT-VM95SP

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA AT-VMN95SP

Audiotechnica

€48.76

Replacement needle for AT-VM95SP (78 rpm). SP 3 mil conical tip (78 disc groove width) Diamond bonded with round shank + aluminum cantilever Compatible with VM95 Series bodies (interchangeable needles) Indicative useful life (taper): ~500 h

AUDIOTECHNICA VMN10CB. Stylus for AT-VM510xCB and AT-VM610xMONO cartridges

New

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN10xCB

Audiotechnica

€48.76

Replacement stylus for compatible Audio-Technica cartridges. Profile: 0.6 mil tapered Compatibility: AT-VM510xCB and AT-VM610xMONO

AUDIOTECHNICA AT-LT10. Head for ½" 4-pin cartridges

New

Cartridge Holders

AUDIOTECHNICA AT-LT10

Audiotechnica

€48.76

AT-LT10 universal head for ½" 4-pin cartridges (with or without threaded inserts). Die-cast aluminium body: lightweight and with less vibration Elongated slots/holes: fine adjustment of overhang and cartridge alignment Non-slip finger lift: more precise stylus placement OFC (oxygen-free copper) wiring included Accessories: M2.6 screws (10 mm ×2, 8 mm...

AUDIOTECHNICA VMN20xEB. Cartridge needle AT-VM520xEB/H

New

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN20xEB

Audiotechnica

€57.02

Replacement needle for AT-VM520xEB/H cartridge. Profile: elliptical 0.3 × 0.7 mil Typical vs conical improvement: more precise tracking and more detail (especially in treble)

AUDIOTECHNICA AT-LH15/OCC. Adjustable TechniHard™ Headband

New

Cartridge Holders

AUDIOTECHNICA AT-LH15/OCC

Audiotechnica

€65.29

15 g adjustable head in TechniHard™ material (high rigidity). Includes AT6101 quad cable Adjustable suspension Adjustable azimuth (fine alignment) Internal thread in the body: mounts the capsule without nuts

AUDIOTECHNICA AT-LH13/OCC. Adjustable TechniHard™ Headband

New

Cartridge Holders

AUDIOTECHNICA AT-LH13/OCC

Audiotechnica

€65.29

1/2" adjustable head weighing 13 g made from TechniHard™ material (high rigidity, less resonance). Includes AT6101 quad cable for reliable connection Adjustable suspension and azimuth for fine alignment of the cartridge Internal thread: nutless mounting (faster and cleaner installation) Ideal if you are looking for a lightweight headshell to optimise...

AUDIOTECHNICA VMN70SP. Replacement Needle for VM670SP

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN70SP

Audiotechnica

€78.51

Replacement needle for Audio-Technica VM670SP. Use: 78 rpm (SP) discs, wide groove Profile: 3 mil conical Diamond: bonded (glued round shank), gray chassis VM series: interchangeable needle within the range to replace wear or change profile

AUDIOTECHNICA AT-LH18H. Head with azimuth and overhang adjustment

New

Cartridge Holders

AUDIOTECHNICA AT-LH18H

Audiotechnica

€81.82

AT-LH18H aluminium head (18 g), high rigidity and hard anodised to reduce vibrations. Fine adjustment via adjustable cylinder: azimuth and overhang Optimised for threaded capsules (e.g. AT-OC9X and VM95) OFC cables included for clean signal transmission Series by weight to adapt the mass: AT-LH13H (13 g) / AT-LH15H (15 g) / AT-LH18H (18 g) Includes:...

AUDIOTECHNICA AT-LH18/OCC. Adjustable TechniHard™ Headband

New

Cartridge Holders

AUDIOTECHNICA AT-LH18/OCC

Audiotechnica

€81.82

AT-LH18/OCC adjustable headshell weighing 18 g, made from TechniHard™ material (high rigidity, improved vibration control). Includes AT6101 quad cable Adjustable suspension for fine-tuning mechanical adjustment Adjustable azimuth (perpendicularity of the cartridge to the disc) Internal thread: cleaner mounting without nuts

AUDIOTECHNICA AT-LH15H. Universal Aluminium Headband

New

Cartridge Holders

AUDIOTECHNICA AT-LH15H

Audiotechnica

€81.82

AT-LH15H universal headshell, 15 g, made of hard anodised aluminium (less resonance/vibration). Optimised for 4-pin cartridges with threaded body (e.g. AT-OC9X and VM95) OFC cables included (oxygen-free copper) Adjustable cylinder for fine adjustment of azimuth and overhang Available in the range: AT-LH13H (13 g) / AT-LH15H (15 g) / AT-LH18H (18 g)...

AUDIOTECHNICA AT-LH13H. Universal 1/2" Headshell

New

Cartridge Holders

AUDIOTECHNICA AT-LH13H

Audiotechnica

€81.82

1/2" universal headstock, 13 g, made of hard anodised aluminium (less vibration).Optimised for 4-pin cartridges with threaded body (e.g. AT-OC9X and VM95 series)OFC cables included (better signal transmission)Adjustable cylinder for fine adjustment of azimuth and overhangAlso available in 15 g (AT-LH15H) and 18 g (AT-LH18H)Includes: hex key, 2 screws, 2...

AUDIOTECHNICA AT-LH11H. Universal ½" aluminium head

New

Cartridge Holders

AUDIOTECHNICA AT-LH11H

Audiotechnica

€81.82

1/2" universal head in 11 g aluminium (the lightest in the LH series). Hard anodised to reduce vibrations and resonance Non-threaded through holes: ideal for cartridges with threaded bodies (e.g. AT-OC9X, AT-ART9X, VM95) OFC cables included (oxygen-free copper) Adjustable cylinder for fine adjustment of azimuth and overhang LH series by weight: 11 /...

Audio-Technica AT-VMN95EN: Replacement Stylus for VM95 Series Cartridges

New

Stylus replacement

AUDIOTECHNICA AT-VMN95EN

Audiotechnica

€98.35

Replacement stylus for Audio-Technica VM95 Series cartridges (compatible with all VM95 bodies). Nude elliptical profile: more accurate reading and more refined sound than a bonded elliptical Nude Round Shank + aluminum cantilever: better control and definition without changing the entire capsule Easy upgrade: you keep the VM95 body and only replace the...

AUDIOTECHNICA AT-VMN95ML: Replacement Stylus for VM95 Series Cartridges

New

Stylus replacement

AUDIOTECHNICA AT-VMN95ML

Audiotechnica

€131.40

MicroLine replacement stylus for Audio-Technica VM95 Series cartridges (compatible with all VM95 bodies). MicroLine profile: very precise groove tracking, more detail and less distortion, especially on the inner tracks Diamante Nude Square Shank + aluminum cantilever: cleaner and more stable reading in complex passages Simple upgrade: you keep the VM95...

AUDIOTECHNICA VMN30xEN. Replacement Stylus for AT-VM530xEN

New

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN30xEN

Audiotechnica

€139.67

Replacement needle for compatible capsules compatibility: AT-VM530xEN. Profile: nude elliptical (bare diamond) 0.3 × 0.7 mil

AUDIOTECHNICA AT-VMN95SH. Replacement Stylus for AT-VM95SH / AT-VM95SH/H

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA AT-VMN95SH

Audiotechnica

€156.20

Shibata Nude replacement needle for AT-VM95SH / AT-VM95SH/H. Aluminum cantilever, square shank Compatible with all VM95 series (interchangeable needles) Lifespan approx.: 800 h Sound: More detail and better tracking than basic profiles

AUDIOTECHNICA VMN40xML. Replacement for AT-VM740xML Cartridge

New

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN40xML

Audiotechnica

€156.20

Replacement needle for AT-VM740xML cartridge. Profile: MicroLine 2.2 × 0.12 mil Cantilever: conical aluminum

AUDIOTECHNICA VMN45xML. Replacement for AT-VM745xML Cartridge

New

Stylus replacement

AUDIOTECHNICA VMN45xML

Audiotechnica

€214.05

Replacement needle for AT-VM745xML cartridge. Profile: MicroLine 2.2 × 0.12 mil Cantilever: solid boron

AUDIOTECHNICA VMN50xSH. Replacement Stylus for AT-VM750xSH

New

In supplier stock. Delivery time 7 days.

Stylus replacement

AUDIOTECHNICA VMN50xSH

Audiotechnica

€247.11

Replacement needle for Audio-Technica AT-VM750xSH. Shibata nude 2.7 × 0.26 mil Solid boron cantilever (more precision and better tracking than aluminum) Recommended VTF: 1.8–2.2 g (2.0 g standard) AT-VMx family: interchangeable needles within the series (except mono models)

Cookie name	Provider	Purpose	Expiry
cookiesplus	https://audiohum.amarillolimon.dev	Stores your cookie preferences.	1 year
PrestaShop-#	https://audiohum.amarillolimon.dev	This cookie helps keep user sessions open while they are visiting a website, and help them make orders and many more operations such as: cookie add date, selected language, used currency, last product category visited, last seen products, client identification, name, first name, encrypted password, email linked to the account, shopping cart identification.	480 hours

Cookie name	Provider	Purpose	Expiry
collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
r/collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_ga_#	Google	Used by Google Analytics to collect data on the number of times a user has visited the website as well as dates for the first and most recent visit.	2 years
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day