We have added the renowned Canadian loudspeaker brand, Verity Audio, to our product selection. Their extensive portfolio includes impressive tower loudspeaker systems such as the Lohengrin IIS, Audio Sarastro IIS, Amadis S, Parsifal Anniversary, Otello, Lakmé and Finn models, as well as the Monsalvat sound system, which has been developed over a period of 25 years of dedicated research. Each of these models is meticulously hand-assembled and subjected to rigorous quality control processes, all with the aim of guaranteeing the absolute satisfaction of the most discerning hi-fi enthusiasts.

Verity Audio's technical experts have listening rooms where they carry out meticulous testing to ensure perfect integration and synergy between each component, achieving an extraordinary level of refinement and performance. In particular, each speaker incorporates a rear-facing subwoofer, with a precise fit designed to integrate seamlessly into any home environment.

Since 1995, Verity Audio has specialised in the manufacture of high-end loudspeakers, using a variety of exotic wood veneers, which are fused with an Italian lacquer finish, giving each loudspeaker an exclusive and elegant aesthetic. With a track record of over 25 years, Verity Audio has won more than a dozen international awards and the acclaim of distinguished HiFi publications.

Now available at www.audiohum.com

Verity Audio Finn

The Verity Audio Finn three-way loudspeakers feature a bass reflex acoustic design. This model, the most compact in the series, is distinguished by its slim column without parallel walls.

It incorporates new SB Acoustics drivers and features a one-piece housing that directs its sound emission exclusively towards the rear, generating a quasi-acoustic suspension. Its configuration consists of a 25 mm fabric tweeter that activates at 5.5 kHz, a 130 mm mid-bass speaker with a fibre-strengthened cone, and a 150 mm woofer with a 3-inch voice coil.

With 91 dB sensitivity, 100 W power capability, 8 ohm impedance and frequency response from 35 Hz to 40 Hz, it is made of one-inch MDF. It has a 6-inch rear-facing woofer, which loads the Bessel-tuned enclosure along with a port that crossovers to the midrange at 150 Hz, while the midrange rises to 4 kHz before delivering to the tweeter, using a third-order crossover of 18 dB per octave. The midrange, which spans between 1 and 4 kHz, is shared by the tweeter and midrange transducers.

Further information: Verity Audio Finn (9.900€)

Verity Audio Lakmé

Verity Audio Lakmé column speakers incorporate an innovative legacy floor isolation system, equipped with advanced MASIS (Mechanical and Airborne Sound Isolation System) technology. In addition, they feature a flexible tripod system that facilitates precise levelling of the speakers.

This model offers a frequency response ranging from 35 Hz to 25 kHz, with a sensitivity of 91 dB and a nominal impedance of 8 ohms. Its musical power handling capacity is 100 W, and its frequency response is in the range of 30 Hz to 50,000 Hz (±3 dB).

The presence of adjustable feet not only protects the speakers from the floor, but also facilitates their movement without causing damage. Their dual passive radiator topology contributes to an impressive dynamic range and fast air speed, resulting in exceptional performance in small to medium spaces.

In terms of transducers, these speakers incorporate Verity's unique soft-ring dome tweeter, ensuring extended, resonance-free high-frequency reproduction. Also included is a custom midrange transducer that provides a smooth, continuous midrange, along with a custom woofer and dual passive radiators that ensure accurate and agile reproduction.

The range of finishes available includes black and high-gloss white, with the option of combining a white front with a black high-gloss enclosure, or a black front with a white high-gloss enclosure (see conditions).

For further information, please contact us: Verity Audio Lakmé (15.900€)

Verity Audio Otello

The Verity Audio Otello three-way speakers excel with an input sensitivity of 9 dB. They cover a bandwidth of 20 Hz to 50 Hz, with a 3.0 dB variation, and feature a nominal impedance of 8 ohms.

The uniqueness of their dual-isolated chassis design lies in the elimination of any interference between the bass and mid-high ranges. The configuration includes four loudspeakers and a bass reflex design at the bottom of the cabinet.

The upper enclosure houses a patented, resonance-free, two-inch neo ring dome tweeter. It complements this with a 5-inch wide-range midrange. In contrast, the lower, bass-dedicated enclosure incorporates two 7-inch speakers with paper cones and a rear-facing bass reflex port.

Mounted on a constrained-layer floor isolation platform with adjustable feet, this imposing model offers impressive dynamics and great versatility. It incorporates the same innovative technologies as the Parsifal Anniversary.

It recommends an amplifier power of 18 W and its cabinet design features a patented asymmetrical internal reinforcement matrix. This prioritises rear wave dispersion and ensures uniform airflow throughout the internal structure.

The enclosures, finished on all sides with layers of Italian polyester lacquer, feature carefully selected materials for a balanced and harmonious aesthetic.

Further information: Verity Audio Otello (19.900€)

Verity Audio Parsifal Anniversary

The Verity Audio Parsifal Anniversary speakers present an upgraded version of this iconic system. This three-way bass reflex loudspeaker in a single tower offers a bandwidth of 25 Hz to 50 kHz with +/- 3dB variation. The nominal impedance is 8 ohms, with a minimum of 4 ohms.

The configuration includes three drivers: the tweeter for treble is a 25 mm soft dome model with dual neo rings, while the mids and bass are handled by two 50 mm woofers with treated polypropylene cones and SD-1 suspended drivers.

Its design combines sleek lines and curves with innovative technologies and is mounted on high-performance platforms that efficiently isolate and couple with the floor.

The new enclosure system is based on an innovative topology for transducer integration, designed with the aim of improving sound coherence.

Further information: Verity Audio Parsifal Anniversary (29.900€)

Verity Audio Amadis S

The high-performance Verity Audio Amadis S column loudspeakers feature a frequency range of 20 Hz to 50 kHz with a 3.0 dB variation. Sensitivity is 93 dB, with a nominal impedance of 8 ohms and a minimum of 3 ohms at 5.5 kHz.

This 3-way bass reflex design model offers full bandwidth, as each transducer has been designed from the ground up for maximum performance.

An outstanding tweeter, with a resonance-free soft dome, reproduces even the most intricate sound textures. The midrange and woofer drivers employ mineral-filled polypropylene cones with special geometry optimised for rigidity, low energy build-up and smooth transitions.

Like some models, the Verity Audio Amadis S employs a unique rearward-facing bass reflex tuning feature that delivers accurate and defined bass. The enclosures are built to avoid resonance, incorporating complexly angled panels that dissipate internal energy and balance the acoustic and mechanical impedance of each panel.

Their unique and elegant design results in enclosures that are lacquered on all sides with no visible joints. They are isolated by a thick, damped aluminium platform.

It includes high purity copper jumpers with a length of 203 mm, a 32 mm thick damped aluminium platform and an isolation base with adjustable feet.

Further information: Verity Audio Amadis S (39.500€)

Verity Audio Sarastro IIS

The Verity Audio Sarastro IIS loudspeakers feature a design that incorporates an 11-inch polypropylene transducer at the rear, with a powerful 4-inch driver. At the top is a smaller enclosure with a 2-inch high aluminium ribbon.

This 3-way column model with bass reflex design offers a frequency response of 20 Hz to 50,000 Hz (±3 dB), a sensitivity of 93 dB (2.83 V / 1M) and a nominal impedance of 8 Ω (minimum of 3 Ω at 5.5 kHz).

The upper enclosure is separated from the woofer by a ¼ inch thick damped aluminium plate, designed to prevent the transmission of low frequency noise into the enclosures. This plate is reinforced with adhesive Sorbothane pads to dampen vibrations in the mid and high frequencies.

The enclosures are made of 1-inch thick MDF and have internal bracing layers coated with polyester lacquer to maximise rigidity. They are fitted with adjustable solid brass and stainless steel spikes.

Both the woofer and midrange drivers of this model are custom products from Audio Technology. The design comes from the brand's owners and expert engineers who have deeply researched the behaviour of the loudspeakers. The midrange transducer, with a bandwidth of 150 Hz to 5.5 kHz, uses a suspended voice coil, shorter than the magnet, to improve linearity. It also incorporates a Faraday ring in the coil formers to focus the magnetic field and prevent variations in the signal from affecting its strength.

The updated Sarastro IIS includes a new speaker tweeter with a reworked magnet and a wider ribbon with better suspension, which allows for better power and adaptation to the dispersion of the midrange transducer. It also features solid silver internal wiring with OFC conductors suspended in a dual micro monofilament design.

The system includes 8-inch high-purity copper jumpers, a 32 mm thick damped aluminium platform and an isolation base with adjustable feet.

Further information: Verity Audio Sarastro IIS (55.900€)

Verity Audio Lohengrin IIS

The Verity Audio Lohengrin IIS loudspeakers are 4-way column models featuring a completely redesigned crossover filter, resting on short platforms that ensure a more even distribution of power from surface to surface.

This model, of bass reflex design, offers a frequency response ranging from 15 Hz to 60,000 Hz with a ±3 dB variation. The nominal impedance is 8 Ω (with a minimum of 4 Ω) and the sensitivity is 95 dB (2.83 V / 1M).

The configuration of these loudspeakers consists of two enclosures separated by a suspended platform. The first enclosure houses a proprietary ribbon tweeter, a wide-bandwidth midrange and a state-of-the-art woofer, all designed for high-performance reproduction. The second enclosure consists of a generous woofer, contributing to an exceptional listening experience. Both modules merge to form an extended-range reference loudspeaker system.

Verity Audio Lohengrin IIS loudspeakers are acclaimed for being unique in their ability to deliver a full dynamic scale of vocals and instruments, all while maintaining realistic dimensions.

Further information: Verity Audio Lohengrin IIS (125.400€)

Verity Audio Monsalvat

The Verity Audio Monsalvat reference system exhibits a remarkable efficiency of 99 dB at 2.83 Vrms and at a distance of 1 metre on axis. Its frequency range extends from 15 Hz to 60,000 Hz. It consists of two main tower units, which include two separate bass towers and a single active crossover device. In addition, it consists of eight subwoofers, a high-quality sound processor (PRO-6) and three power amplifiers (AMP-200 and AMP-60).

The main towers of this model feature a 100 mm aluminium ribbon tweeter, a patented 150 mm (6'') mid-high driver and four patented 229 mm (8'') mid-bass drivers. The low-frequency towers each house four 380 mm (15''') subwoofers. The arrangement of these towers can be vertical and independent, or horizontal and contiguous.

For further information, please contact us: Verity Audio Monsalvat (375.000€)