PYLON AUDIO PEARL SAT
PYLON AUDIO PEARL SAT. Mini shelf box for multimedia systems or mini 2-way systems.
Bookshelf or monitor speakers are often placed on feet or on top of furniture.
They are recommended speakers for intimate listening and/or for small spaces. Its biggest advantage is its small size and that it can be used in rooms where loud bass cabinets cause problems. They can be passive, active or wireless speakers.
There are 18 products.
Active filters
PYLON AUDIO PEARL SAT. Mini shelf box for multimedia systems or mini 2-way systems.
PYLON AUDIO OPAL SAT. Shelf box for hi-fi or effect boxes for home theater.
PYLON AUDIO PEARL MONITOR. Shelf box for hi-fi or effect boxes for home theater.
LYNGDORF MH-3. 2-way bookshelf speakers.
Power 80W. Tweeter: 1″ textile soft dome, Midrange transducer: 4″, 35 mm aluminium voice coil. Nominal impedance: 4 Ohm. Unit price.
PYLON AUDIO SAPPHIRE SAT. Mini shelf box for multimedia systems or mini 2-way systems.
PYLON AUDIO OPAL SAT. Shelf box for hi-fi or effect boxes for home theater.
Stand not included. Stand Price: €356
MARTINLOGAN Bravado. EXDEMO.
The Bravado system features a configuration with dual Folded Motion® tweeters, a powerful 5-inch aluminium cone woofer and an amplification capacity of up to 200 watts. In addition, Bravado provides advanced connectivity options such as DTS® Play-Fi® certified wireless streaming, Amazon Works with Alexa compatibility, Apple AirPlay® and a noticeable performance boost thanks to Anthem Room Correction (ARC®) technology.
LYNGDORF CS-2. 2-way bookshelf speakers.
Front bass reflex. Tweeter 1″ textile soft dome, Mid/bass 6,5″ 35 mm voice coil. Unit price.
LYNGDORF CS-1. 2-way bookshelf speakers.
Front bass reflex. Tweeter 1″ textile soft dome, Mid/bass 6,5″ 35 mm voice coil. Unit price.
MartinLogan ElectroMotion FX2. Hybrid electrostatic loudspeaker.
PYLON AUDIO RUBY MONITOR. Shelf or floor box for multimedia systems or 2-way mini-systems.
PYLON AUDIO RUBY 20. Two-way floor or column loudspeakers (37HZ 60W 87DB)
MARTINLOGAN Motion B10. 2 ways Bookshelf Speaker.
Tweeter 1x1.4'', mid-bass 5.5''. 56-25,000 Hz. 92 dB. 5 ohms. 20-200W. Height 31.8 cm.
PYLON AUDIO RUBY 25. Two-way floor or column loudspeakers (38HZ 100W 89DB)
PYLON AUDIO RUBY 30. Two-way floor or column loudspeakers (35HZ 100W 89DB)
MARTINLOGAN Motion XT B100. 2 ways Bookshelf Speaker.
Tweeter 1.25x2.4'', mid-bass 6.5''. 45-25,000 Hz. 93 dB. 4 ohms. 20-250W. Height 36.8 cm.
FALCON LS3/5a Gold Badge BBC License Classic
Walnut
Stand is not included
PYLON AUDIO JASPER MONITOR. The Jasper Monitor 18 cabinet from Pylon Audio is the representative stand or shelf model of the Jasper line.
Bookshelf or monitor speakers are often placed on feet or on top of furniture.
They are recommended speakers for intimate listening and/or for small spaces. Its biggest advantage is its small size and that it can be used in rooms where loud bass cabinets cause problems.
They can be passive, active or wireless speakers.
Active speakers: These are speakers that do not need an amplifier, they already have it incorporated inside. It is a very interesting option to have a quality loudspeaker in a compact size, low cost and easy to install.
Passive speakers: These are conventional high-fidelity speakers. They are used with speaker cables and an amplifier.
Passive speakers work by using an amplified signal. If the speaker has more than one cone (for example, a low-mid unit and a tweeter), the signal is divided into those high and low frequencies in a circuit called a crossover (filter).
To choose the best hi-fi speaker for our audio equipment, several factors must be taken into account:
What use will you give the speaker?: Types of speakers
There are different types of hi-fi speakers. We can distinguish between:
Bookshelf (monitor-type) speakers: Bookshelf or monitor speakers are often placed on feet or on top of furniture. They are recommended speakers for intimate listening and/or for small spaces. Its biggest advantage is its small size and that it can be used in rooms where loud bass cabinets cause problems.
Floor speakers (standing or columns): They are named for their structure and design. They are usually placed directly on the ground, on their own base or on uncoupling spikes.
Ceiling or wall speakers: These are speakers that are usually used for home theater or in those cases where architectural integration is necessary. They usually require installation and once installed they go completely unnoticed. They are a good option for home theater systems, to avoid having the entire listening room full of cables and speakers.
How is your listening room? (size, materials, acoustics, insulation)
It is important to choose suitable speakers for the size of the room and depending on where you are going to place them in the room. The loudspeakers are made to cover a given room cubicle, so you should avoid putting small monitors in a 70m2 room and large columns for a 15m2 studio.
Wall and floor materials: Hard surfaces are enemies of sound. It doesn't matter how good the sound is coming out of a speaker, as long as there are a lot of big smooth surfaces where that sound can reflect. If your room has a lot of reverberation or echo, you should add furniture, curtains, rugs, plants... anything that breaks the smooth surfaces. You can also add acoustic material specially created for these cases to your room.
If you are going to place your speakers on furniture, you should avoid buying reflex speakers or woofers because of the bass that will cause undesirable resonances to be generated.
To also avoid this problem with bass, it is advisable not to locate your speakers in the corners. This can create standing waves that muddy the sound from your equipment or even cause bass to be cancelled.
What music do you hear? Does it do it with high or low volume? Technical characteristics of the speaker:
The impedance: This value is measured in Ohms and determines the resistance to the passage of electrical current through the speaker. This means that the lower the impedance, the easier the electric current to pass and the power generated by the amplifier in watts is higher (a 4Ohm speaker will sound louder than an 8Ohm speaker with the same amplifier). You have to look for a good synergy between the impedance of the speakers and the ability of the amplifier to generate that power without distortion.
Sensitivity: This figure is measured in decibels (dB) and indicates the maximum volume that our speaker is capable of reaching. A reasonable limit is 100 dB, which is the usual limit that all speakers and players usually have, above that figure we could damage our ears with prolonged exposure.
Frequency range: The human ear is only capable of hearing sound waves that have a frequency between 18 or 20 Hz and 20,000 Hz (20 kHz). The bass sounds are located in the range that goes from 10 Hz to 256 Hz; the middle sounds are between 256 Hz and 2,000 Hz; and the treble goes from 2,000 Hz to 20,000 Hz. When a loudspeaker is capable of approaching its minimum frequency response to 20 Hz and its maximum to 18-20,000 Hz, then it is a full-range loudspeaker capable of reproducing the entire audible musical spectrum.
Output power: It is the one that determines the maximum power (RMS) that a speaker can withstand before the sound that is produced is distorted excessively or begins to deteriorate, if a speaker works above that power it can be damaged, by not being able to dissipate the heat produced by the electric current that circulates through the coil, and this being able to melt the insulator that covers the copper wire.
Number of ways: Thanks to the use of filters (crossover), a loudspeaker can distribute the sound waves of the low frequencies (10 Hz to 256 Hz); the mids (256 Hz to 2,000 Hz) and the treble (2,000 Hz to 20,000 Hz) to different types of drivers prepared to be used in each different frequency range. If a speaker uses a specific driver for all three ranges, then it will be a three-way speaker, if a speaker uses two drivers for all three ranges (a tweeter for treble and a mid-bass driver for low and mid frequencies) then we will have a two-way speaker.
Closed or reflex enclosure: Closed enclosure speakers are those that have their drivers inside a hermetic acoustic enclosure to keep the air inside, so that the inside air becomes part of the woofer's own suspension, In a speaker Bass Reflex enclosure has a port (opening) that allows air to flow between the inside and outside of the box.
Chat with us on WhatsApp