AUDIOTECHNICA AT-MONO3/LP
Audiotechnica AT-MONO3/LP. MC cartridge.
High-output mobile coil output cap for 33 rpm mono vinyl.
Bankwire payment (3% DTO)
If you choose Bankwire payment you will get a 3% discount on your order.
Shipping Policy
Return policy
Audiotechnica AT-MONO3/LP. MC cartridge.
Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.
Carefully selected component and state of the art technology produce a high resolution cartridge.
Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.
The average usage time is 500 hours extending the life span of precious mono recording.
High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.
To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.
This model is not compatible with 78rpm SP records
Specifications:
Type: Moving Coil
Frequency Response: 20 to 20,000 Hz
Coil Impedance: 40 W (1 kHz)
DC Resistance: 40 W
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: 400 W to 47,000 W
Coil Inductance: 190 mH (1 kHz)
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)
Stylus Shape: Conical
Cantilever: Aluminium Pipe
Stylus Construction: 0.6 mil
Mount: 1/2” centers
Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Weight: 6.8 g
Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101
Bank transfer (3% OFF)
If you pay by bank transfer you will get an extra 3% discount on your order.
For personalized advice contact us without any commitment.
