The Next Generation of the Legendary OC9 Series of Capsules
Since its launch more than 30 years ago, Audio-Technica's pioneering OC9 series of moving coil capsules has been recognized by both discerning vinyl listeners and professional critics for its musical transparency, its expressive sound and precise construction. It is characterized by its square shank for precise needle alignment and a bare diamond for greater recovery of the finest details.
Features a low-mass elliptical stylus and aluminum cantilever.
A neodymium magnet and a pure iron yoke provide increased magnetic energy.
Threaded inserts in the cartridge body allow the cartridge to be mounted to the headstock or integrated arm with just two screws, no nuts required
Aluminum body minimizes unwanted vibration to reduce resonance and audio reproduction superior
Continuously cast oxygen-free pure copper (PCOCC) is used for the coils to achieve the purest possible signal
Dual voice coil stereo cartridge with bare elliptical stylus
Incorporates a low-mass elliptical stylus and aluminum cantilever
Neodymium magnet and pure iron yoke provide increased magnetic energy
Threaded inserts in the cartridge
body Aluminum body minimizes vibration and reduces resonance
PCOCC is used for coils to achieve pure signal transmission
Model AT-OC9XEN
1/2 ”Center Mount / Threaded Holes
Frequency Response 20 - 30,000 Hz
Body Material Aluminum
Channel Separation 25 dB (1 kHz)
Output Channel Balance 1.5 dB (1 kHz)
Output Voltage 0 , 35 mV (at 1 kHz, 5 cm / sec)
Vertical Tracking Angle 20 degrees Vertical Tracking
Force Range 1.8 to 2.2 g (standard 2.0 g)
Needle Shape Bare Elliptical Needle
Size 0.3 x 0.7 mil
Needle Construction Bare Square
Shank Cantilever Aluminum Tube
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 - 6 cm / dyne
Dynamic Compliance 9 x 10 - 6 cm / dyne (100 Hz)
Terminal Pins Copper
Cable Used for PCOCC Coil (Ohno Continuous Casting Process Copper)
Recommended Load Impedance Minimum 100 Ohms
Capsule Weight 7.6 gr
Dimensions 17.3 ( H) x 16.8 (W) x 25.7 (L) mm
Included Accessories 1 non-magnetic screwdriver; 1 brush; 2 washers; 4 pairs of mounting screws 5mm, 8mm, 10mm, 12mm; 1 plastic protector