Audiotechnica AT33PTG/II. MC cartridge.

Advanced bare tapered boron and weight reduction

This model has successfully reduced the thickness and length of the cantilever, compared to the AT33PTG. The coil impedance has also been refined from 17W to 10W. We have made a significant weight reduction in the vibration system and improved the basic operation and sound quality of the capsule.

Microlinear needle with high performance and long life

Microlinear (ML) is a specially polished linear contact needle. It performs better in the high frequency range than tapered or elliptical needles due to its small radius of curvature, and it features low distortion and extends high frequency reproduction even when playing the inner circumference of records. And the constancy of the linear contact contour is another of its main features, with an average product life of about 1000 hours.

"Amazing Magnetic Properties"

Neodymium magnet with greatly increased magnetic energy and permendur yoke with high saturation flux density and amazing magnetic properties.

“Allows for a purer transmission”

The PCOCC coil allows for a purer transmission as it is not subjected to granular contours in the direction of transmission.

"Limits unnecessary vibrations"

The VC mold that secures the coil is constructed of hard synthetic resin containing potassium titanate to make it stronger and more rigid.

Type Dual Voice Coil

Mounting 1/2 "Center

Frequency Response 15 - 50,000Hz

Body Material Aluminum / Synthetic Resin

Channel Separation 30dB (1kHz)

Output Channel Balance 1dB (1kHz)

Output Voltage 0.3mV (1kHz and 5cm / sec)

Vertical Tracking Angle 23 ° Vertical Tracking

Force Range 1.8 - 2.2g (2.0g standard)

Needle Shape Microlinear Needle

Curvature Radius Microlinear Needle

Construction Bare Square

Shank Cantilever Solid Gold Plated Boron

Coil Impedance 10Ω (1kHz)

Coil Inductance 22µH (1kHz)

DC Resistance 10Ω

Static Compliance 40 × 10-6cm / dtna

Dynamic Compliance 10 × 10-6cm / dyne (100Hz)

Terminal Pins Brass

Recommended Load Impedance Min 100Ω

Weight 6.9g

Dimensions H16 × W16.6 × D26.5mm

Accessories Included 1 non-magnetic screwdriver; 2 washers; 2 nuts; 2 x 13mm mounting screws; 2 x 19mm mounting screws; 1 plastic protector; 1 set of PCOCC terminal cables (AT6101)