AUDIOTECHNICA AT-XP3/H.

AT-XP3 cartridge pre-mounted on the AT-HS6BK head.

Dual VM magnet construction.

Rugged, durable design for specialised, high quality DJ playback.

AT-XP3/H

Audiophile DJ cartridge mounted in the AT-HS6BK head.

The AT-XP series cartridges provide high quality sound for vinyl DJs. With all the features of a DJ cartridge, but with high-fidelity sound, the XP series are perfect for stage and club DJs who prioritise sound quality.

AT-XP3 audiophile DJ cartridge pre-mounted in the AT-HS6BK headphone shell.

Dual VM magnet construction.

Rugged, durable design for specialised, high quality DJ playback.

Carbon fibre reinforced ABS cantilever and nylon wire suspension ensure accurate tracking.

Compatible with ATN-XP5 and ATN-XP7 replacement styli for an upgrade.

Configuration as a single cartridge (AT-XP3), replacement stylus (ATN-XP3) and as a headset together with the available AT-HS6BK headset (AT-XP3/H).

Compatibility of the AT-VM9E series with the AT-XP series DJ cartridges.

The XP series electromagnetic motor body is fully compatible with all VM95 series replacement styli and will provide more output voltage than the VM95 series cartridge. It therefore provides enhanced compatibility with the phono inputs of professional DJ mixers.

The VM95 series electromagnetic motor body is also compatible with the three replacement styli of the AT-XP series DJ cartridge, however, the XP series electromagnetic motor body will deliver more output voltage than the VM95 series cartridge in order to provide better compatibility with the audio inputs of professional DJ mixers.

Note that the typical tracking force when using the XP series styli is three grams, compared to two grams for the VM95 series styli.

The suspension design and compliance of the XP-Series styli have been optimised for intensive DJing, including possible manual adjustment and back adjustment.

The suspension design of the VM95-Series and the compliance of the VM95-Series have been designed for optimal audiophile playback.

Model AT-XP3/H.

Mounting Half-inch.

Frequency response 20 to 18,000 Hz.

Channel separation 20 dB (1 kHz).

Output channel balance 2.0 dB (1 kHz).

Output voltage 5.5 mV (at 1 kHz, 5 cm/sec).

Vertical tracking angle 20 degrees.

Vertical tracking force range 2.0 to 4.0 g (standard 3.0 g).

Conical stylus shape.

Stylus size 0.6 mil.

Stylus construction with bonded round stem.

Carbon reinforced ABS rocker.

Coil impedance 6,700 ohms (1 kHz).

Coil inductance 550 mH (1 kHz).

Static Compliance 20 x 10 - 6 cm / dyne.

Dynamic Compliance 6.0 x 10 - 6 cm / dyne (100 Hz).

Recommended load impedance 47.000 Ω.

Recommended load capacitance 100-200 pF.

Cartridge weight 15.6g.

Dimensions 21.2 × 21.4 × 62.4 ( W x H x D mm).

Spare stylus ATN-XP3.