The AT-LP140XP fully manual professional DJ turntable features a large direct-drive motor and a cast-aluminum, damped, anti-resonance platter to ensure stable on-axis rotation at 33-1/3, 45 or 78 rpm. It is equipped with an S-shaped tonearm with height adjustment with adjustable tracking force (counterweight) and anti-skating adjustment.

Audio-Technica has been a leader in cartridge design for over 50 years, and that expertise is evident in the rugged, high-performance, tapered stylus-bonded 0.6 mil AT-XP3 DJ cartridge included with the turntable. Comes pre-installed on an AT-HS6 Universal 1/2" Anchor Head.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable.

Other features include a start/stop button; playback direction change; selectable high-precision quartz-controlled pitch lock and pitch adjustment control with adjustment ranges of +/-8%, +/-16%, and +/-24%; strobe dish with speed indicator; retractable connector type needle indicator light; and removable hinged dust cover.

Enjoy high-fidelity audio and performance for professional DJs

Direct drive high torque motor with speed stabilization

Fully manual operation

Adjustable dynamic anti-slip control

Selectable speeds of 33/45/78 rpm

Professional anti-resonance, damped cast aluminum platter with felt mat

AT-HS6 Universal 1/2" Docking Head and AT-XP3 DJ Cartridge with 0.6 mil Tapered Attached Stylus

Balanced, straight tonearm with hydraulically actuated lift lever, height adjustment, and latching mechanism

Dedicated phono level output (5.5mV)

Strobe dish with speed indicator

Forward/reverse playback capability and pitch control with quartz-controlled speed lock

Retractable connector type stylus signal light for easy cueing in low light conditions

Damped base to reduce low-frequency feedback coloration

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), power cord, 45rpm adapter, counterweight, felt mat, and removable hinged dust cover

Available in black (AT-LP140XP-BK) and silver (AT-LP140XP-SV)

Type Fully manual operation, 3 speeds

High torque DC motor

Control Method Direct drive

Speeds 33-1/3, 45 and 78 rpm Turntable

Cast aluminum

Starting Torque >2.2 kgf.cm

Wow and Vibration <0.2 % (WTD) @ 3 kHz (JIS)

Signal to Noise Ratio >50 dB (DIN-B)

Output Level 5.5 mV nominal at 1 kHz, 5 cm/s

Power Supply Requirements 115/230 VAC ( 60/50 Hz)

Power Consumption 4.3 W

Dimensions 452 mm (17.80") Width x 352 mm (13.86") Depth x 158.6 mm (6.24") Height

Weight 10.0 kg, without dust cover

Included Accessories AT-XP3 phono cartridge; AT-HS6 head; Dual RCA (male) to Dual RCA (male) cable with ground; counterweight; felt mat; dust cover; 45rpm adapter; connector type needle indicator light

Tone arm type: S-balanced with detachable head

Effective tone arm length: 230.5mm

Caliper: 16mm

Tracking error angle: Less than 3 degrees

Applicable cartridge weight: 3.5-8.5g Anti-

skating range: 0-4 g

Replacement stylus: ATN-XP3