The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal playback of high-quality audio from a vinyl record. The two-speed (33-1/3 and 45 rpm) turntable features an aesthetically pleasing anti-resonance MDF plinth with imitation teak veneer to reduce low-frequency acoustic feedback.

The turntable features a straight aluminum tonearm with adjustable tracking force (counterweight), an AT-HS4 universal 1/2" mount headstock, and an AT-VM95C Dual Moving Magnet pickup cartridge. Audio-Technica has led cartridge design for over 50 years, and that experience is evident in the versatility and high performance of the AT-VM95C cartridge, which comes with a tapered 0.6 mil stylus, but is also compatible with any of the VM95 series replacement needles, offering a wide variety of options for every budget and application.

The AT-LPW30TK is equipped with a built-in selectable phono preamp and a dual RCA output cable that allows direct connection to components with or without a dedicated phono input.

Fully manual belt drive turntable with two speeds: 33-1/3 and 45 rpm

Fully manual operation

Adjustable dynamic anti-slip control

Professional anti-resonance cast aluminum platter with rubber mat

AT-HS4 universal 1/2" headstock and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil tapered stylus

The AT-VM95C cartridge is compatible with any of the VM95 series replacement styli, offering a wide variety of options for every budget and use

Straight tonearm with hydraulically actuated lifting lever and latching mechanism

Medium Density Wood (MDF) Plinth with Faux Teak Veneer

Integrated switchable phono preamplifier for a phono or line level output

AC adapter performs AC/DC conversion outside the chassis, reducing noise in the signal chain

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Technical characteristics:

TYPE: Manual belt drive

MOTOR: Servo controlled

SPEEDS:

33-1/3 RPM

45 RPM

PLATE: Cast aluminum

BRAKING SYSTEMS: Electronic brake

WOW AND SHOCK: < 0.15% WRMS (33 rpm) @ 3 kHz

SIGNAL/NOISE RATIO: >60dB

OUTPUT LEVEL: "PHONO" Preamplifier: 2.5 mV nominal 1 kHz, 5 cm/sec

"LINE" preamplifier: 150 mV nominal 1 kHz, 5 cm/sec

PHONO PREAMP GAIN: 35 dB nominal, RIAA equalization

POWER SUPPLY REQUIREMENTS: 110/240V AC 60/50 Hz

ENERGY CONSUMPTION:

1.1W (operating)

1W (engine off)

0.1 W (power off)

DIMENSIONS: 420 mm (width) x 116.9 mm (height with lid closed) x 340 mm (depth)

WEIGHT: 3.9kg

ACCESSORIES INCLUDED:

Dust cover, platter, mat, drive belt, counterweight, AT-HS4 head, AT-VM95C stereo cartridge; 45 rpm adapter, RCA audio cable (approx. 1 m), AC adapter (approx. 1.5 m) (AD-SA1205WE), hinged dust covers