No matter how perfect an AC power source is, distortion adds inside any AC cable, especially within a stranded cable. Even the most sophisticated filters and power supplies cannot eliminate this cable-induced distortion.

SEMI-SOLID AND CONCENTRIC CONDUCTORS:

Semi-solid concentric packed conductors are used in some of AudioQuest's AC power and speaker cables as an inexpensive and flexible alternative to typical stranded conductors. Semi-solid concentric packed conductors use fewer large strands that do not change position along the length of the cable. While solid conductors are the complete solution to wire distortion, semi-solid concentric conductors avoid many of the distortion mechanisms of stranded conductors.

LONG GRAIN COPPER (LGC):

LGC enables smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metallurgical industry specification regarding "loss" without any concern for distortion. LGC has fewer oxides within the conductive material, fewer impurities, fewer grain limits, and ultimately better performance. NRG-X3 cables use LGC wires in a semi-solid concentric conductor arrangement.

HELICAL MATRIX GEOMETRY:

The relationship between conductors defines the most basic electrical values ​​of a cable (including capacitance and inductance). However, even when those variables are kept in reasonable balance, the relationship between drivers can vary in a way that greatly affects performance. The construction of a helical beam (such as circular-spiral) allows for significantly better dynamic contrast and clarity than if the same conductors were run in parallel or as multiple twisted pairs.

COLD WELDING SYSTEM:

This novel plug design allows a perfect heat-free connection between the cord and the plug. The connection between the plug and the conductors is made using AQ's cold welding system, which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The cold soldering system refers to a combination of high pressure at the point of contact and the use of paste impregnated with copper or silver.

TERMINATIONS:

2-pole wall socket according to IEC C-13.

Specs:

Length 1m, 2m, 3m.

Cable diameter 3 x 1.65 mm2 (3 x 15 AWG)

Conductor type Long-stranded solid copper (LGC) made from semi-solid concentric conductors.

Geometry Helical Formation Sleeve

Braided outer sleeve Black / Gray

Terminations Male Schuko type current connector to IEC C-13 type current connector with cold welding.