MUSICAL FIDELITY M2SI + LUMINA I Audiohum
SPECIAL OFFER

MUSICAL FIDELITY M2SI + LUMINA I

MUSICAL FIDELITY M2SI + LUMINA I. Audio Pack

€1,549.00 €1,848.00 - €299.00
Have you seen it cheaper? Contact us
 In stock
  Bankwire payment (3% DTO)

If you choose Bankwire payment you will get a 3% discount on your order.

 

Shipping Policy

 

Return policy

The Musical Fidelity M2si is a low-priced, high-quality integrated amplifier + Sonus-Faber LUMINA I front-ported 2-way / 2-speaker bass-reflex system

Musical Fidelity M2SI

Power 60 watts per channel into 8 ohms (18dBW).

Voltage 22 Volts RMS, 20Hz to 20 kHz; start of trimming.

62 volts peak to peak.

25 Amps peak-to-peak current.

Damping factor 36.

Output devices 1 pair per channel.

Line input.

THD + N <0.014% typical, 20Hz to 20kHz.

Signal-to-noise ratio> 96dB 'A-weighted'.

Input impedance 40 k Ohms.

Frequency response +0, -0.1dB, 10Hz to 20 kHz.

Connections.

Line level inputs 6 pairs of line level RCA connectors.

Line level outputs 1 pair of line level RCA connectors, constant level TAPE outputs.

1 pair of RCA line level connectors, pre-amp outputs for eg bi-amplification.

Speaker outputs 2 pairs of 4mm banana plugs.

Power requirements.

Mains voltages 115 / 230VAC 50 / 60Hz (factory preset).

100VAC 50 / 60Hz (alternative).

Maximum consumption of 320 watts.

Weight.

Unit only, unpackaged 9.2 kg (20¼ lbs).

In cardboard boxes of 13 kg (30⅔ lbs).

Dimensions.

Width 440 mm (17⅓ ").

Height, including feet 100 mm (4 ").

Depth (front to back) including 400mm (15¾ ") terminals.

Sonus Faber LUMINA I

• Compact monitor with high performance and exceptional quality / price ratio.• 2-way / 2-speaker bass-reflex system with front port.

• 29mm textile dome tweeter with D.A.D. by Sonus Faber.

• 120mm mid / bass loudspeaker with multi-fiber composite cone.

• Square enclosure to enhance balance between form and function.

• Crossover filter with exclusive Sonus Faber topology.

• High versatility High Fidelity / Home Cinema.

• Two sets of connection terminals for bi-wiring / bi-amping.

• 65-24,000 Hz frequency response.

• Sensitivity of 84 dB / W / m.

• Nominal impedance of 4 ohms.

• Amplification power between 30 and 100 W RMS.

• Built entirely by hand in Italy.

• Dimensions: 148x280x213 mm (W x H x D).

• Weight: 4.4 kg.

Bank transfer (3% OFF)

If you pay by bank transfer you will get an extra 3% discount on your order.

For personalized advice contact us without any commitment.

Do you want to renew your system?

Would you be interested in exchanging a device when purchasing this item?

Complete this form