The M2si is a high-quality integrated amplifier at a low price + The M2scd is a high-quality CD player with excellent sound + Sonus-Faber LUMINA I front-ported 2-way / 2-speaker bass-reflex system

Musical Fidelity M2SI

Power 60 watts per channel into 8 ohms (18dBW).

Voltage 22 volts RMS, 20 Hz to 20 kHz; start of trimming.

62 volts peak to peak.

25 amp peak-to-peak current.

Damping factor 36.

Output devices 1 pair per channel.

Line input.

THD + N <0.014% typical, 20Hz to 20kHz.

Signal to noise ratio> 96dB 'A-weighted'.

Input impedance 40 k Ohms.

Frequency response +0, -0.1dB, 10Hz to 20 kHz.

Connections.

Line level inputs 6 pairs of line level RCA connectors.

Line level outputs 1 pair of line level RCA connectors, constant level TAPE outputs.

1 pair of RCA line level connectors, pre-amp outputs for eg bi-amping.

Speaker outputs 2 pairs of 4mm banana plugs.

Power requirements.

Mains voltages 115 / 230VAC 50 / 60Hz (factory preset).

100VAC 50 / 60Hz (alternative)

Maximum consumption of 320 watts.

Weight.

Unit only, unboxed 9.2 kg (20¼ lbs).

In cardboard boxes of 13 kg (30⅔ lbs).

Dimensions.

Width 440 mm (17⅓ ").

Height, including feet 100 mm (4 ").

Depth (front to back) including 400mm (15¾ ") terminals.

Musical Fidelity M2SCD

Departure

Output impedance: 50 ohms

Output, 0 dB digital level: RCA output - 2.2V r.m.s. nominal

CAD

DAC Circuit: Delta-Sigma 24-bit (Bitstream) Double Differential 8x Oversampling

Correlated total jitter: <135 picoseconds peak-to-peak

Linearity: <0.1dB to -96dB

Frequency response: 10Hz to 20 kHz -0.2dB max.

Channel Separation:> 105dB 20Hz to 20kHz

Signal to noise ratio:> 117dB "a" - wtd.

Total Harmonic Distortion: <0.003% 10Hz to 20kHz

Connections

Line level outputs: 1 pair of line level RCA connectors, left and right outputs

Digital outputs: 1 RCA SPDIF coaxial connector, 1 TOSLINK optical connector

Required power

Mains voltages 115 / 230VAC 50 / 60Hz (factory preset)

100VAC 50 / 60Hz (alternative)

Consumption 20 Watts maximum

Weight

Unit only, unpackaged 6.65 kg (14⅔ lbs)

In cardboard boxes of 10.5 kg (23 lbs)

Dimensions

Width 440 mm (17⅓ ")

Height, including feet 100 mm (4 ")

Depth (front to back) including 375mm (14¾ ") terminals

Sonus Faber LUMINA I

• Compact monitor with high performance and exceptional quality / price ratio.

• 2-way / 2-speaker bass-reflex system with front port.

• 29mm textile dome tweeter with D.A.D. by Sonus Faber.

• 120mm mid / bass loudspeaker with multi-fiber composite cone.

• Square enclosure to enhance balance between form and function.

• Crossover filter with exclusive Sonus Faber topology.

• High versatility High Fidelity / Home Cinema.

• Two sets of connection terminals for bi-wiring / bi-amping.

• 65-24,000 Hz frequency response.

• Sensitivity of 84 dB / W / m.

• Nominal impedance of 4 ohms.

• Amplification power between 30 and 100 W RMS.

• Built entirely by hand in Italy.

• Dimensions: 148x280x213 mm (W x H x D).

• Weight: 4.4 kg.