The M2si is a high-quality integrated amplifier at a low price + The M2scd is a high-quality CD player with excellent sound + Bookshelf speakers. 2 way. 30-150 W Sonus-Faber Sonetto I.

Musical Fidelity M2SI

Power 60 watts per channel into 8 ohms (18dBW).

Voltage 22 volts RMS, 20 Hz to 20 kHz; start of trimming.

62 volts peak to peak.

25 amp peak-to-peak current.

Damping factor 36.

Output devices 1 pair per channel.

Line input.

THD + N <0.014% typical, 20Hz to 20kHz.

Signal to noise ratio> 96dB 'A-weighted'.

Input impedance 40 k Ohms.

Frequency response +0, -0.1dB, 10Hz to 20 kHz.

Connections.

Line level inputs 6 pairs of line level RCA connectors.

Line level outputs 1 pair of line level RCA connectors, constant level TAPE outputs.

1 pair of RCA line level connectors, pre-amp outputs for eg bi-amping.

Speaker outputs 2 pairs of 4mm banana plugs.

Power requirements.

Mains voltages 115 / 230VAC 50 / 60Hz (factory preset).

100VAC 50 / 60Hz (alternative)

Maximum consumption of 320 watts.

Weight.

Unit only, unboxed 9.2 kg (20¼ lbs).

In cardboard boxes of 13 kg (30⅔ lbs).

Dimensions.

Width 440 mm (17⅓ ").

Height, including feet 100 mm (4 ").

Depth (front to back) including 400mm (15¾ ") terminals.

Musical Fidelity M2SCD

Departure

Output impedance: 50 ohms

Output, 0 dB digital level: RCA output - 2.2V r.m.s. nominal

CAD

DAC Circuit: Delta-Sigma 24-bit (Bitstream) Double Differential 8x Oversampling

Correlated total jitter: <135 picoseconds peak-to-peak

Linearity: <0.1dB to -96dB

Frequency response: 10Hz to 20 kHz -0.2dB max.

Channel Separation:> 105dB 20Hz to 20kHz

Signal to noise ratio:> 117dB "a" - wtd.

Total Harmonic Distortion: <0.003% 10Hz to 20kHz

Connections

Line level outputs: 1 pair of line level RCA connectors, left and right outputs

Digital outputs: 1 RCA SPDIF coaxial connector, 1 TOSLINK optical connector

Required power

Mains voltages 115 / 230VAC 50 / 60Hz (factory preset)

100VAC 50 / 60Hz (alternative)

Consumption 20 Watts maximum

Weight

Unit only, unpackaged 6.65 kg (14⅔ lbs)

In cardboard boxes of 10.5 kg (23 lbs)

Dimensions

Width 440 mm (17⅓ ")

Height, including feet 100 mm (4 ")

Depth (front to back) including 375mm (14¾ ") terminals

Sonus Faber SONETTO I

2-way speaker system. Ventilated box design.

Tw: High definition DAD ™ driver. DKM dome membrane, Ø 29mm

Mw: Diaphragm made to measure with cellulose pulp and other natural fibers, Ø 150mm

CROSS

2,500Hz

FREQUENCY RESPONSE

45 Hz - 25,000 Hz

SENSITIVITY

87 dB SPL (2.83 V / 1m)

NOMINAL IMPEDANCE

4 ohms

CAN

SUGGESTED AMPLIFIER OUTPUT POWER

30W - 150W, no clipping

DIMENSIONS (HXWXD)

359 (1090 bracket included) x 219 x 305 mm

14 (43 bracket included) x 9 x 12 inches

WEIGHT: 5.5 kg - net weight (bracket not included)