Tellurium Q System Enhacement CD
Tellurium Q System Enhacement CD
There are 24 products.
Active filters
Tellurium Q System Enhacement CD
AUDIOMATICA CLIO Pocket
The microphone clip uses a 5/8" - 27 TPI mount to fit most microphone stands. The 1/2" acoustic calibrator adaptor has an internal rubber o-ring to provide a good seal ensuring highly accurate calibration.
AUDIOMATICA 19” Rack Panel
By using this panel, it is possible to assemble the QCBOX Model 5 Audio Interface and the Clio 12 so that they can be mounted together.
AUDIOMATICA CLIO Panel
By using this panel, it is possible to assemble the QCBOX Model 5 Audio Interface and the Clio 12 so that they can be mounted together.
AUDIOMATICA Measurement Microphone
The measurement microphones from Audiomatica are precision condenser electret microphones perfectly suited for laboratory and on-field acoustical measurements.
AUDIOMATICA Calibrated Measurement Microphone
The measurement microphones from Audiomatica are precision condenser electret microphones perfectly suited for laboratory and on-field acoustical measurements. This calibrated version comes with a certificate and digital calibration file.
FOCAL Stand Aria S
Stand. 60 cm high. Pack of two.
FOCAL Stand Kanta Center
Floor stand for center speaker. Price per unit.
AUDIOMATICA CLIO Pocket 2.1 Measurement System
Clio Pocket is a powerful yet portable measurement system from Audiomatica. The system is a combination of multi-platform software, Clio CP-01 Audio Interface hardware and MIC-02 precision microphone.
AUDIOMATICA CLIO ClioQC Model 5
The QCBOX Model 5 is designed to extend the functionality of an electro-acoustical analyzer like the CLIO system. It is USB controlled, through dedicated software, to assist frequency response and impedance measurements or to perform DC measurements.
KAISER ACOUSTICS FLAT ACOUSTIC PANELS FPL1
State-of-the-art acoustic panels. Flat acoustic panel with micro-holes (1.1 mm). Surface with micro-holes on one side for wall/ceiling mounting (light weight). Standard finishes: oak or cherry.
Dimensions: 600 x 800 x 40 mm
FOCAL Stand Kanta N1
Floor stand for Focal Kanta Nº1" speakers.
KAISER ACOUSTIC SPLINE DIFFUSER SD1
Three-dimensional diffuser based on mathematical spline. 600x600x150mm
These diffusers are a product developed and produced exclusively by Kaiser Acoustics.
Smooth/flat rear surface. Can be used back to back in pairs for stand-alone use or
Stand-alone use or individually for wall/ceiling mounting.
Standard finishes: white or grey.
Standard size is 52″ x 52″ x 8" (600x600x150mm).
Colour options available.
FOCAL On Wall 300 Stands. Floor stands for Focal loudspeakers to hang
KAISER ACOUSTICS FLAT ACOUSTIC PANELS FPL2
State-of-the-art acoustic panels. Flat acoustic panel with micro-holes (1.1 mm). Surface with micro-holes on one side for wall/ceiling mounting (light weight).
Standard finishes: oak or cherry.
Dimensions: 600 x 1.100 x 40 mm
KAISER ACOUSTICS FLAT ACOUSTIC PANELS FPL3
State-of-the-art acoustic panels. Flat acoustic panel with micro-holes (1.1 mm). Surface with micro-holes on one side for wall/ceiling mounting (light weight).
Standard finishes: oak or cherry.
Sizes: 600 x 1.380 x 40 mm
KAISER ACOUSTICS FLAT ACOUSTIC PANELS FPL4
State-of-the-art acoustic panels. Flat acoustic panel with micro-holes (1.1 mm). Surface with micro-holes on one side for wall/ceiling mounting (light weight).
Standard finishes: oak or cherry.
Dimensions: 600 x 1.60 x 40 mm
FOCAL Stand Sopra N1
Floor feet for Sopra 1 speakers. Price per pair
Chat with us on WhatsApp