MUSICAL FIDELITY M2SI + Linton. Audio Pack
bloques info producto

Bank Transfer (3% OFF)
If you make the payment via bank transfer, you will receive an extra 3% discount on your order.

Need to upgrade your equipment?
Would you be interested in trading in a device when purchasing this item?
The Musical Fidelity M2si is a high-quality, low-priced integrated amplifier + Wharfedale Linton satellite and monitor speakers.
M2SI musical fidelity
Power 60 watts per channel into 8 ohms (18dBW).
Voltage 22 volts RMS, 20 Hz to 20 kHz; start of trimming.
62 volts peak to peak.
25 amp peak-to-pak current.
Damping factor 36.
Output devices 1 pair per channel.
Line input.
THD + N <0.014% typical, 20Hz to 20kHz.
Signal to noise ratio> 96dB 'A-weighted'.
Input impedance 40 k Ohms.
Frequency response +0, -0.1dB, 10Hz to 20 kHz.
Connections.
Line level inputs 6 pairs of line level RCA connectors.
Line level outputs 1 pair of line level RCA connectors, constant level TAPE outputs.
1 pair of RCA line level connectors, pre-amp outputs for eg bi-amping.
Speaker outputs 2 pairs of 4mm banana plugs.
Power requirements.
Mains voltages 115 / 230VAC 50 / 60Hz (factory preset).
100VAC 50 / 60Hz (alternative).
Maximum consumption of 320 watts.
Weight
Unit only, unboxed 9.2 kg (20¼ lbs).
In cardboard boxes of 13 kg (30⅔ lbs).
Dimensions.
Width 440 mm (17⅓ ").
Height, including feet 100 mm (4 ").
Depth (front to back) including 400mm (15¾ ") terminals.
Wharfedale Linton
3-Way Vending Box and Floor Mount Overview.
Bass reflex box.
Complement 3-way transducer.
Bass Driver 8 "(200mm) black woven Kevlar® cone.
5 "(135mm) mid-range black woven Kevlar® cone.
1 "(25mm) Triple Driver Soft Dome.
AV Shield No.
Sensitivity (2.83v @ 1m) 90dB.
Recommended amplifier power 25-200W.
Peak SPL 110dB.
Nominal impedance 6Ω.
Minimum impedance 3.5Ω.
Frequency response (+/- 3dB) 40Hz ~ 20kHz.
Bass Extension (-6dB) 35Hz.
Crossover frequency 630Hz and 2.4kHz.
Height (on base) 565mm.
Width 300mm.
Depth (with terminals) (330 + 30) mm.
Net weight 18.4 kg 18.4 kg / pc.