REGA RX3. 2.5 way column type speakers. Price per pair.
Product not available.
If you make the payment via bank transfer, you will receive an extra 3% discount on your order.
Would you be interested in trading in a device when purchasing this item?
REGA RX3. 2.5 way column type speakers. Pair price
The Rega RX-THREE loudspeaker system offers balance, detail and dynamics thanks to Rega's hand-designed and hand-built loudspeaker and filter assembly.
The newly developed DX-125 mid-bass speaker with a paper-jacketed cone is at the heart of the RX range and is perfectly matched with the Rega ZRR tweeter and RR125.8 woofer. These custom cones are mounted on a new, larger chassis made of 18mm MDF and covered with a natural wood veneer in a choice of three finishes. The RX-THREE will integrate seamlessly into any system and deliver exceptional performance worthy of any system.
Product details
The RX-THREE is a small floorstanding speaker with a side bass cone. You can adjust the imaging and bass response by changing the distance from the speaker to the rear and side walls. As with all loudspeakers, this will depend on the size of the room, floor and furniture, so you will need to do several tests with different distances to optimise the performance in your environment. If the bass booms too much, you can position the speakers, with the side woofer, inwards to suppress any unwanted bass response.
Technical specifications:
-System: 2.5-way
-Chassis: 18 mm MDF with wood veneer
-Chassis design: through-banding
-Dimensions (H x W x D): 80 x 16 x 25,8 cm
-Weight (unit): 11,5kg
-Reflex port: front
Nominal impedance: 6 ohms -Sensitivity: 89 dB
-Sensitivity: 89 dB
-Amplifier power: 100W per channel. This value is quoted as a guide. Depending on the quality of the amplification, an amplification between 30 and 500 W can be used without problems.
-Tweeter: Rega ZZR
-Mid/bass: (cone-shell) DX-125
-Side woofer: Rega RR125.8
To ensure sufficient clearance and to avoid damage to the front panel, the grille magnets should be placed just above the cone screws.
You might also like
