ELECTROCOMPANIET ECI 80 D

ELECTROCOMPANIET ECI 80 D

The ECI 80D is our new entry-level integrated amplifier. The new ECI 80D delivers 2 x 80 watts into 8 ohms, using a self-developed class A / B amplifier.

€3,299.00
Have you seen it cheaper? Contact us
 In Stock
  Bankwire payment (3% DTO)

If you choose Bankwire payment you will get a 3% discount on your order.

 

Shipping Policy

 

Return policy

We have equipped it with a built-in RIAA preamp for your LP player (compatible with MM cartridges), 2-way Bluetooth HD for both streaming from your iOS, Android unit, Mac or PC, as well as for streaming high definition to your high-end headphones. And of course a 5 input DAC (3 Toslink, 2 COAX)

WORKS WITH TURNTABLE.

All-in-one unit.

The integrated phono preamp with MM cartridge holder allows you to connect your LP player directly to the ECI80D and enjoy your record collection.

Technical characteristics:

Headphone output.

The ECI 80D has a built-in dual headphone amplifier, allowing you to listen to 2 units of wired headphones at the same time!

HD Bluetooth streaming.

The ECI 80D supports HD Bluetooth streaming from your phone, tablet, PC or MAC. It also supports real-time streaming to high-definition wireless Bluetooth headphones.

Attractive form factor.

An extremely substantial and dynamic integrated amplifier in an attractive form factor, capable of driving a wide range of loudspeakers on the market.

Take control.

The ECI80D comes with a remote control that allows you to control all its functions from the comfort of your chair, sofa or couch.

PREAMPLIFIER:

Input impedance: 75 kOhms.

Noise on the ground: <-130dB.

THD + N: <0.002%.

Frequency response (-3dB): 1 - 150 kHz.

Volume adjustment range: - 110 dB to +15 dB.

OUTPUT AMPLIFIER:

THD + N: <0.005%.

Output power (in 8 Ohms): 2 x 80W.

Output power (in 4 Ohms): 2 x 150W.

Damping factor (8 Ohm load):> 300.

Frequency response (-3dB): 1 - 150kHz.

SNR (input shorted, ref. 1W into 8 ohms, A-weighted): 102 dB.

Gain: 25 dB.

Protection: DC, overload, temperature.

RIAA PHONO:

Pick-up support: Moving magnet.

Gain: 40 dB @ 1kHz.

Input impedance: 47 kOhms ||| 100pF.

RIAA correction accuracy: +/- 0.1dB, 25-20kHz.

Subsonic filter: -3 dB @ 14 Hz.

THD: <0.001%.

SNR: 83 dB (A-weighted).

Overload margin: 30dB @ 1kHz.

HEADPHONE AMPLIFIER:

THD + N: <0.001%.

Single output load impedance in use:> 16 Ohms.

Load impedance of both outputs in use:> 32 Ohms.

Maximum output power (into 16 Ohm load): 0.4W.

Maximum oscillation of the output voltage: Peak of +/- 8V.

Output impedance: 10 Ohms.

Protection: DC, overload.

DIGITAL AND STREAMING:

Optical input: PCM: 44.1kHz / 16bit up to 192kHz / 24bit.

Coaxial input: PCM: 44.1kHz / 16bit up to 192kHz / 24bit.

Bluetooth compatibility: BT5.0, A2DP, SBC, AAC, aptX-HD.

CONNECTIVITY:

Digital inputs: 2 coaxial, 3 optical.

Analog inputs: 2 RCA.

Preamp analog output: 1 RCA.

Service port: 1 USB.

12V trigger: 1 input, 1 output.

Phono MM: 1 RCA.

Headphone outputs: 3.5mm plug + 6.35mm plug.

Speaker outputs: 1 pair of binding posts.

WEIGHT AND MEASUREMENTS:

Weight: 8 kg - 17.6 lbs.

Width: 470 mm - 18.5 inches.

Depth: 262 mm - 10.3 inches.

Height: 90mm - 3.5 inches.

VOLTAGE AND POWER CONSUMPTION:

Mains input voltage: 100-240VAC, 50 / 60Hz, 3A.

Idle (no load or signal): 30 W.

Standby: <0.5 W.

OFF (main switch OFF): 0 W.

5044000001

Bank transfer (3% OFF)

If you pay by bank transfer you will get an extra 3% discount on your order.

For personalized advice contact us without any commitment.

Do you want to renew your system?

Would you be interested in exchanging a device when purchasing this item?

Complete this form