PROJECT Sweep it S2

Disc brooms have been around since the early 1970s. Some do a good job, some don't. In many cases, the brush rushes toward the center of the platter, clashing with the tonearm. This phenomenon is known as slippage. The latest developments aim to solve this problem. This is where the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the Sweep it S2 disc broom. The Sweep it S2 is built in collaboration with Klaus Mick and uses his patented technology to stabilize the disc broom. Extensive theoretical and empirical research has been conducted in the development of this product.

The magnetic attraction between the neodymium magnet -based on the top of the cylinder- and the [Fe] core/counterweight stabilizes the disc broom. In addition, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilizing force. As the aluminum of the brush arm is paramagnetic, it acts as an additional space between the neodymium magnet and the [Fe] core/counterweight.

The height of Sweep it S2 is adjustable in a range of approximately 1 cm. The position can be locked with the fixing screw on the base. With this mechanism, it is possible to adjust the height of the puck broom arm to align it horizontally with the platter. Correct horizontal alignment ensures the correct tracking force of about 6g.

flexible placement

The record broom can be placed in one of the two corners on the left side of the turntable. Placement depends on the type and shape of your turntable. In the optimal position, the broom should be aligned with the axis (ie the center of the plate). Deviations (from the axis) between 1.5 and 2 cm are well compensated by the design of the Sweep it S2. Larger deviations can cause more drastic slip effects.

Characteristics:

Stabilization with neodymium magnet.

Prevents the common disc broom phenomenon known as "skating."

Adjustable height.

Flexible Placement

Very low electronegativity natural hair brush.

Clean discs during playback.

Built in collaboration with Klaus Mick.

Available in silver and black metallic finish.

Technical specifications:

Weight 430 g.

Total length of the arm 226 mm.

Overall height 65mm - 75mm.

Base diameter 46mm.

Arm material Aluminum.

Colors Black, Silver.