WBT WBT-0110 Ag. Male RCA connector. NEXTGEN series. For cables up to 9 mm. Welding. (4 units)

The characteristic impedance of 75 ohms means these jacks carry not only great analog signals, but also great digital audio and video signals. The transmission bandwidth is 1 GHz.

Eddy currents occur in metallic components close to where alternating currents flow. These currents can cause significant distortions in the signal. The WBT-0110 Ag is designed in such a way that eddy currents do not occur at all.

The contact elements of the plug are made of high purity silver, the best electrical conductor of all, to ensure optimal signal transmission. The metal is naturally passivated so the surface does not corrode or migrate and impair contact quality.

The clamping mechanism, which works in the same way as the clamping device on a drill, firmly holds the outer contact against the RCA jack. The high clamping pressure not only ensures a secure connection but also minimizes transition resistance. The pressure wedge between the contact and the sleeve is made of plastic, which means that the sleeve is completely isolated and cannot influence the signal. In addition, any size variation in the outer contact of a sleeve is compensated for, ensuring a perfect fit.

The clamping sleeve is designed with two sections, so that the front section moves freely when the rear section rotates. This eliminates the risk of torsional stress on the contact elements.

The center pin is ideally shaped and slotted, providing a firm yet springy contact that ensures a long-lasting and reliable electrical connection with absolutely minimal transition resistance.

The central contact element can be removed to facilitate the soldering of the cables. WBT provides a special next generation tool for this purpose to OEM users. WBT recommends the silver solder WBT-0800, which does not damage the surface (see also Connection by solder).

A Torx screw provides reliable cable strain relief.

Specifications:

Cable diameter: up to 9 mm

Characteristic impedance (typ.): 75 ohms

Connection technology: solder

Identification: available in 9 colors

Strain relief: Torx screw (T.6)

Recommended tool:

Torx wrench T.6 WBT- 0488 (supplied with each consumer package)

WBT-0481 Professional OEM Mount Screwdriver