Shopping Cart
There are no more items in your cart
- New
HYPEX FA123
Integrated 3-channel amplifier module with DSP.
Power: 2 x 125 W + 1 x 100 W (up to 250 W bridged)
High-fidelity Ncore® amplification technology
Integrated DSP with 15 biquads per channel and 3 selectable presets
Ideal for 2- or 3-way active speakers
Neutral, precise, and transparent reproduction
Versatile inputs and automatic signal detection
Protection against clipping, overheating, and filter errors
Configurable with Hypex Filter Design (HFD) software
bloques info producto
Bank Transfer (3% OFF)
If you make the payment via bank transfer, you will receive an extra 3% discount on your order.
Need to upgrade your equipment?
Would you be interested in trading in a device when purchasing this item?
Hypex FA123 FusionAmp. 3-Channel Integrated Amplifier Module with DSP
The Hypex FA123 is a high-performance, three-channel plate amplifier featuring advanced DSP control and Ncore® amplification technology. Delivering 2 x 125 W + 1 x 100 W, it is perfectly suited for 2-way or 3-way active loudspeaker designs, offering an all-in-one audiophile-grade solution.
Key Features
Based on proven Ncore® amplification.
Integrated high-performance DSP.
All-in-one amplifier, power supply, and DSP module.
Transparent, neutral and low-distortion audio reproduction.
Ideal for active loudspeakers and DIY speaker projects.
Overview
The FA123 FusionAmp integrates:
A high-efficiency switch-mode power supply (SMPS).
A powerful digital signal processor (DSP).
Three Ncore-based amplifier channels.
This makes it one of the most complete and powerful solutions available for high-fidelity active speaker design. The Ncore® topology ensures extremely low THD and IMD, offering reference-grade transparency across the full power and frequency range—even at normal listening levels.
Amplification Configuration
2 x 125 W channels (can be bridged for 1 x 250 W)
1 x 100 W channel (ideal for high-frequency drivers)
Channels fully configurable via Hypex Filter Design (HFD) software
Connectivity & Control
Versatile input options supporting a wide range of sources
Fully configurable DSP: crossover filters, EQ, delay, limiters
Three user-selectable filter presets
Auto input sensing and auto standby (user adjustable)
BTL capability for higher output
Important Note
To protect your connected speakers, the amplifier does not output audio by default. You must load a valid filter using the Hypex Filter Design (HFD) software before use.
Protection Features
Clip protection
Overtemperature protection
DSP filter error protection
Package Contents
1 x Hypex FA123 Plate Amplifier
1 x Printed User Manual
1 x Speaker cable set
1 x Power cable (EU or UK version, depending on region)
The Hypex FA123 FusionAmp is the ultimate choice for designers and enthusiasts seeking a compact, powerful, and ultra-clean amplification module for active speaker systems.
Hypex FA123 FusionAmp Technical Specifications
Item Number: FA123
EAN: 0691046948106
Power Output (Nominal)
2 x 125 W + 1 x 100 W @ 4 Ω
2 x 75 W + 1 x 100 W @ 8 Ω
2 x 115 W @ 2 Ω + 1 x 100 W @ 4 Ω
Power Output (Bridged Mode)
1 x 200 W @ 4 Ω
1 x 250 W @ 8 Ω
Minimum Load Impedance
2 Ω (Main Channels)
4 Ω (High-Frequency Channel)
Amplifier Section
Topology: Ncore® Class D
Efficiency: 92 % (at full output)
SNR (Signal-to-Noise Ratio): 118 dB
THD+N: 0.0015 % (10–20,000 Hz @ 0.5 x rated power)
Frequency Response: 10 Hz – 50,000 Hz
Inputs & Outputs
Input Impedance:
54 kΩ (Unbalanced RCA)
44 kΩ (Balanced XLR, differential)
2.2 MΩ (Balanced XLR, common mode)
Input Sensitivity:
1.17 Vrms for rated power output
Speaker Output Channels:
3 channels total
DSP & Digital Processing
Integrated DSP and DAC
Max Sample Rate:
192 kHz (general)
96 kHz (optical)
Connectivity
Analog Inputs/Outputs: 1 / 1
S/PDIF Inputs/Outputs: 2 / 1
AES/EBU Inputs/Outputs: 1 / 1
Coaxial Inputs/Outputs: 1 / 1
RCA Input: 1
XLR Inputs/Outputs: 2 / 2
USB: Configuration only
Network / Bluetooth: Not supported
Pre-Out for Subwoofer: Not available
Control & Configuration
Auto Power On/Off: Yes
Remote Control: Supported (sold separately)
Mobile App Control: No
EQ Adjustment: Yes
EQ Presets: Yes
Phase Control: Yes
Crossover Frequency Adjustment: Yes
Selectable Presets: Yes
Software: Hypex Filter Design (HFD)
OS Compatibility: Windows only
Power Supply
Input Voltage: 200–240 VAC ±10 %
Connector: IEC C14
Standby Consumption: Not specified
Current Limit: 12.5 A
Under/Overvoltage Protection: Yes
Mechanical
Dimensions (H x W x D): 360 x 120 x 55 mm
Cutout Dimensions (for mounting): 336 x 96 mm
16 other products in the same category:
- New
- New
- New
- New
- New
Sold out
- New
- New
- New
- New
- New
- New
Tap to zoom
