AIR TIGHT ATC-5s
AIR TIGHT ATC-5s. Line preamp.
Line input: RCA × 3. Input impedance: 47kΩ (18dB gain). Line output: RCA × 2.
Bankwire payment (3% DTO)
If you choose Bankwire payment you will get a 3% discount on your order.
Shipping Policy
Return policy
AIR TIGHT ATC-5s. Line preamp.
The Air Tigh ATC-5 uses three 12AX7 tubes on the EQ side and two 12AT7s on the amplification side. It has two single-ended inputs for moving magnet (MM) capsules so that it can play with two cymbals or two arms. It also has three line inputs.
Air Tight is one of Japan's leading tube amplifier manufacturers based in Takatsuki, Osaka.
Air Tight s one of the few manufacturers that does not use printed circuit boards and assembles with specialised handling lines.
Technical characteristics:
Valves used: 12AX7 × 3, 12AT7 × 2
Phono EQ input: RCA/MM × 2
Input impedance: 47kΩ (40dB gain)
Phono EQ output: RCA × 1
Output Impedance: Recommended load more than 47kΩ
Line input: RCA × 3
Input impedance: 47kΩ (18dB gain)
Line output: RCA × 2
Output Impedance: Recommended load more than 47kΩ
Output voltage: 20V (100kΩ load/1% distortion)
Line Amplifier Distortion: THD 0.02 % (1 V/1 kHz)
Frequency response Phono Equalizer: 50Hz~20kHz(±0.2dB) /20Hz-2.5dB
Frequency Response Line Amplifier: 20Hz~100kHz-1dB
Power consumption: 50 VA
Dimensions: 400 (width) × 260 (depth) × 90 (height) (provisional)
Weight: 9kg
Bank transfer (3% OFF)
If you pay by bank transfer you will get an extra 3% discount on your order.
For personalized advice contact us without any commitment.
