If you make the payment via bank transfer, you will receive an extra 3% discount on your order.
Would you be interested in trading in a device when purchasing this item?
Analog audio interconnect cable named after Venezuela's Angel Falls, the world's tallest waterfall, with a height of 979 meters (3,212 feet) and a drop of 807 meters (2,648 feet).
At Bridges&Falls, you'll find better metals and more sophisticated technologies, including Air-Tube insulation, Dielectric Bias System, and Noise Dissipation System, at prices lower than ever.
All cables in our Bridges&Falls series put their left and right channels in a single jacket and feature our double balanced asymmetrical geometry with separate high quality positive and negative conductors. This design allows for a thin, flexible and exceptionally versatile high performance cable that can be terminated with a variety of current connections including 3.5mm (male or female), DIN and RCA. Note however that, by necessity, the connectors on the Bridges&Falls cables are quite close together. If your components' L and R inputs are more than 3" (7.6 cm) apart, consider models from our Rivers or Elements series.
Available lengths: 0.6m - 20m
Features:
DOUBLE BALANCED ASYMMETRIC GEOMETRY
Designed for single-ended applications, Double Balanced Asymmetrical geometry offers a relatively lower impedance to the ground for a richer, more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, dual-balanced designs separate the two for cleaner, quieter performance.
PERFECT-SURFACE SOLID SILVER CONDUCTORS (PSS)
Perfect-Surface technology applied to ultra-pure silver provides unprecedented clarity and dynamic contrast. Perfect-Surface Silver (PSS) is AudioQuest's highest quality metal. Solid conductors prevent strand interaction, a major source of cable distortion. Extreme purity Perfect-Surface Silver minimizes distortion caused by grain boundaries that exist within any metallic conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.
FEP AIR PIPE INSULATION (FEP IS A FLUORINATED POLYMER)
Any solid material adjacent to a conductor is actually part of an imperfect circuit. The insulation of the wires and the materials of the circuit board absorb energy (loss). Some of this energy is stored and later released as distortion. Air, however, absorbs almost no energy and FEP is the best extrudable solid insulation, absorbing less energy than other materials. The use of FEP Air-Tube insulation, with almost nothing but air around the solid conductors, improves the focus sound and dynamics of an audio system.
3-LAYER CARBON BASED NOISE DISSIPATION SYSTEM (NDS)
Achieving 100% shield coverage is easy. Preventing captured radio frequency interference (RFI) from modulating the equipment ground reference requires Audioquest's Noise Dissipation System (NDS). Traditional shielding systems typically absorb and then drain RF noise/energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes signal distortion. NDS's alternating layers of metal and carbon-loaded synthetics "protect the shield", absorbing and reflecting most of this noise/RF energy before it reaches the ground bonded layer.
COLD SOLDERED, DIRECT SILVER PLATED, PURE RED COPPER TERMINATIONS
Direct silver plated, cold brazed, pure red copper terminations. Direct silver plating is optimized for sound. It looks dull because there is no underlying layer of shiny nickel to cause distortion.
DIELECTRIC POLARIZATION SYSTEM WITH RADIO FREQUENCY TRAP
Any insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, the dielectric's involvement (nonlinear energy absorption and release) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for multi-octave audio. very sensitive to time. The inclusion of an RF trap (developed for AudioQuest's Niagara series of power products) ensures that no RF noise is induced into the signal conductors of the DBS field elements. (DBS, US Patent Nos. 7,126,055 and 7,872,195 B1)
Technical Characteristcs:
METAL: Solid copper "Perfect Surface" (PSS)
GEOMETRY: Double asymmetric balanced (lower ground impedance, + and - conductors of the same quality)
DIELECTRIC: FEP Air-Tubes
NOISE DISSIPATION SYSTEM: Carbon-based noise dissipation and crosstalk reduction system
SHEATH: Black/Silver braided fabric
CONNECTORS FINISH RCA: Pure Red Copper Cold Solder Silver Plated Directly
CONNECTORS: RCA - RCA with ground
LENGTH: 1.2m
