DAYTON AUDIO iMM-6 Measurement Microphone
DAYTON AUDIO iMM-6 Measurement Microphone
There are 18 products.
Active filters
DAYTON AUDIO iMM-6 Measurement Microphone
DAYTON AUDIO Dayton Audio iMM-6S iDevice Calibrated Measurement Microphone Straight
DAYTON AUDIO iMM-6 C Measurement Microphone
DAYTON AUDIO EMM-6 Electret Measurement Microphone
DAYTON AUDIO UMM-6 USB Measurement Microphone
AIR TIGHT ATH-3s. Step-up transformer for MC voice coil.
AIR TIGHT ATH-2. Step-up transformer for MC moving coil.
AIR TIGHT ATC-3. 5-input tube preamplifier.
AIR TIGHT PC-1 Coda. MC Cartridge.
Semi-line contact capsule
Internal impedance: 1.7 ohms (DCR)
Output voltage: 0.5 mV/1 kHz
Needle pressure: 2.0 - 2.2 g
Air Tight ATM-1S. Stereo power amplifier. 36W + 36W @ 8 Ohms. EL34 valves. Two lines.
AIR TIGHT ATC-5s. Line preamp.
Line input: RCA × 3. Input impedance: 47kΩ (18dB gain). Line output: RCA × 2.
Air Tight PC-1 Supreme. MC Cartridge.
AIR TIGHT OPUS-1. MC Cartridge
AIR TIGHT ATM-300R. Power amplifier with 300B valve.
Power output : 9W+9W. Frequency response : 30Hz~40kHz (-1dB / 1W).
AIR TIGHT ATM-2 Plus. Stereo power amp in push-pull configuration.
70W + 70W @ 8 and 4 Ohm. KT-88/6550 outlet valves x 4 (Fixed Bias). Inlet valves 12AX7 x 2, 6CG7 / 6FQ7 x 4
AIR TIGHT ATE-3011. Reference phono preamp.
5 different EQ curves (RIAA / NAB / AES / FFRR / FLAT) for both Turnover and Roll-off.
Valves used 12AX7 x 3.
Air Tight ATM-2211. Mono power amplifier.
1 x 32W @ 8 Ohms. Valves: 1 x 12AX7, 1 x 12BH7, 1 x 211. Input: 1 x RCA, 1 x XLR (No. 2 pin = HOT)
Pair of stages.
AIR TIGHT ATM-3211. Monophonic reference stages.
120W @ 6 Ohm. Valves used: 12AX7 x 1, 12BH7 x 3, 211 x 2.
PAIR OF STAGES
Chat with us on WhatsApp