QUALITON P200
QUALITON P200.
2 x 100 w monophonic power amplifier capable of driving any loudspeaker. Slow ignition for valve protection. A magnificent price-quality ratio.
Bankwire payment (3% DTO)
If you choose Bankwire payment you will get a 3% discount on your order.
Shipping Policy
Return policy
QUALITON P200. 2 x 100 w monophonic power amplifier capable of driving any loudspeaker.
STEREO MODE
Name Value
Rated output power 2 x 100 W
Input impedance, Balanced Stereo IN 40 kOhm
Input impedance, Unbalanced Stereo IN 10 kOhm
Input sensitivity Balanced Stereo IN 480 mV, to rated output Input sensitivity,
Unbalanced Stereo IN 480 mV, to rated output
Gain +35.4 dB (RL = 8 Ohm)
Frequency response 18 Hz to 60 kHz (-3 dB, rated output)
Total Harmonic Distortion < 1.2% (f = 1 kHz, rated output)
Signal-to-noise ratio > 100 dB (RL = 8 Ohm, rated output)
Load impedance 4 or 8 Ohm
BRIDGED MODE
Name Value
Rated output power 1 x 200 W
Input impedance, Bridge IN 20 kOhm
Input sensitivity, Bridge IN 1V, to rated output
Gain +32 dB (RL = 8 Ohm)
Frequency response 20 Hz to 55 kHz (-3 dB, rated output)
Total Harmonic Distortion < 2% (f = 1 kHz, rated output)
Signal-to-noise ratio > 100 dB (RL = 8 Ohm, rated output)
Load impedance 8 Ohm
GENERAL
Name Value
Number of input ports / channel 1 / unbalanced Stereo IN 1 / balanced Stereo IN 1 / balanced Bridge IN
Number of output ports / channel 1 unbalanced
Power OUT Tubes required 4 x KT120 (KT150 or KT170 optionally) 2 x 6922 2 x 12AX7
Weight 26 kg
Dimensions 43 x 46 x 21 cm
Power requirement 720 W
Bank transfer (3% OFF)
If you pay by bank transfer you will get an extra 3% discount on your order.
For personalized advice contact us without any commitment.
