WBT WBT-0152 Ag. Male RCA connector. NEXTGEN series. For cables up to 10.8 mm. Welding. (4 units)

Maximum conductivity (one-piece signal conductor made of fine silver)

Largely swirl-free

Ungefähr broadband capability (up to 200 MHz)

Excellent electromagnetic (EMI) shielding

Absolutely secure signal transmission via pat. WBT pick up clamping fixture

Two-piece clamping sleeve in black piano lacquer

Signature RCA plug with nextgen™ technology

With sterling silver signal wire

nextgen™ - new generation of WBT RCA connectors

The basic element that influences the sound quality of the WBT-0110 Ag: the minimum mass of fine silver signal conductors. Silver is chosen due to better electrical signaling, but also excellent fine resolution. The signal conductors are passivated and therefore better protected against corrosion or migration, which would affect the quality of the contact.

WBT-0152 Ag with its transmission bandwidth of up to 200 MHz well above the transmission bandwidth of RCA connectors.

Through the pick-up manifold device that works like a drill chuck of a drilling machine, the plug contact has been firmly inserted into the RCA socket. Maximum contact speed provides a secure connection, but also minimizes transition resistance.

Thanks to the two-piece clamping sleeve, the sleeve does not rotate when the clamping sleeve is tightened and therefore the contact elements are not exposed to torsional pressure. Furthermore, in this way the inaccuracy dimension of the outer contacts of the sockets is compensated.

The center pin is slotted and slightly bent upwards with its firm spring feature that has a long lasting secure electrical connection with the lowest possible transition resistance.

The body element is made of brass (platinum) to accept rigid and particularly thick cables and is designed for larger diameter cable (up to 10.8 mm Ø). The metal connector body is of course electrically decoupled from the Center Contact Unit and is made from as little metal as possible, so WBT-0152 is widely available.

Other recordings for recordings (turntables, microphones) have good shielding against interfering electromagnetic fields. Undesirable interference can be surrounded by (cell phones, computers, etc.). WBT-0110 nextgen ™ is the perfect RCA connector for digital links, the new WBT-0152 Ag optimizes analog connections. WBT-0152 Electromagnetic shielding with electromagnetic shielding.

To solder your cable, WBT recommends using WBT-0800 (see also solder connection) which is smooth on the surface.

Torx screw provides secure cable strain relief. (The position of the Torx screw on the round shaft of the plug may vary depending on the production process.)

Cable diameter: up to 10.8 mm

Technical connection: solder (see WBT silver solder)

: Torx screw (T.6)

: Cable strain relief

Recommended Tool:

> WBT-0488 T.6 Torx Wrench

(supplied with each end-user sales package)

> WBT-0481

Professional OEM Assembly Torque Wrench