The V5 Titan is a dedicated high current power cleaning and distribution system that delivers sheer power.

IsoTek's iconic Titan high current power cleaning system has been dramatically improved and boldly redesigned. Not only is the V5 avant-garde in its visual design, appearing to be carved from a single block of aluminium, it harnesses the latest technical innovations from a leading brand in the specialized field of AV and audio power systems.

The V5 Titan is a dedicated high current power cleaning and distribution system that delivers sheer power. The product measures 220mm wide, 350mm deep and 147mm high. It features 3 independent outlets, each with its own dedicated power cleaning network. Thus, Titan is three high-current, low-impedance power cleaning networks in a single half-width chassis. Both differential mode and common mode noise are dramatically reduced. Cross contamination from connected components is also kept to a minimum due to multiple power cleaning stages for each outlet. Most power filters couple the output taps together, each running in series. This is a mistake,

The electrical architecture and design of the V5 Titan have been drastically improved. The printed circuit board design and topology have been revised and now offer over 50% improvement in amperage and a decrease in resistance. Unique critical components (custom made) have better overall tolerances with improved inductance and current handling. The new circuit offers twice the inductance, with an 80% increase in current leading to more open sound staging, micro dynamics and detail with more immediate timing. Throughout the design the direct current withstand (DCR) has been dramatically improved. As part of IsoTek's goal to reduce DCR and bring performance closer to the ideal of zero ohms,

These technological improvements make the V5 Titan offer absolute power, an unrestricted current delivery within what the electric company can supply and the regulations allow. Typically for power amplifiers or high wattage electronics, IsoTek provides an output that offers extremely low impedance and low DCR, completely eliminating (within power filtering concepts) any possibility of restriction of current and improves the dynamic range, being the impedance of the chain back to the power plant much higher. When the power gets polluted, the dynamic range is reduced. This is exactly like birdsong drowned out by traffic noise pollution. Not that the song of the birds was not audible,

IsoTek's absolute power circuitry offers greater perceived dynamics. Dynamic range in music is the ratio of the loudest to the quietest sound produced, combined with a decrease in background noise, the power comparison, or in other words, the dynamic range. To maintain high amperage levels and extraordinarily low levels of resistance on the PCB, up to eight times the general standard of copper is used before pure silver plating.

The source component filters have a moderate amount of DCR to aid in the performance of increasing the electrical separation between connected loads. The circuit thus recognizes the enormous amounts of differential mode noise produced by connected equipment and acts to reduce and nullify differential mode cross-contamination between connected electronic components.

The V5 design features a 16A RCBO fuse system for the three high-power outlets, providing 3680W at 230V or 1840W at 115V.

This fuse system is a substantial improvement over a standard ordinary fuse due to the contact area. By virtue of its electrical function, a standard fuse must have a very fine wire, which is also the case with the expensive gold-plated audiophile versions. The IsoTek fuse system offers a contact area at least 1,000 times greater, and a connection that is always strong.

The KERP© system (Kirchhoff's Equal Resistance Path) guarantees the same resistance and the same power supply to all outputs. Internal wiring is of the highest standard: silver-plated, ultra-pure continuous-cast Ohno copper solid core strands offer low resistance and high amperage. A fluorinated ethylene propylene (FEP) helix is ​​wrapped around the conductor before an extruded FEP dielectric protects the conductor and creates a virtual dielectric of air (FDA). This construction offers unmatched performance and provides the ultimate in high performance, low resistance internal power supply systems. In addition, 153'000A instantaneous protection is provided,

The internal wiring of IsoTek products is synergized with the IsoTek range of power cables. A critical but overlooked area is maintaining consistency of design and material properties throughout an audio harness, whether it be signal carrying cables or its power cable network.

V5 Titan also contains a System Link outlet, designed to link multiple units together while maintaining a fixed ground reference, and preserving the need for multiple outlets.

The V5 Titan has a high quality yet highly functional design and is an excellent upgrade to a complete audio system. Also included is IsoTek's award winning Premier Power Cord.

The V5 design features a 16A RCBO fuse system for the three high-power outlets, providing 3680W at 230V or 1840W at 115V.

This fuse system is a substantial improvement over a standard ordinary fuse due to the contact area. By virtue of its electrical function, a standard fuse must have a very fine wire, which is also the case with the expensive gold-plated audiophile versions. The IsoTek fuse system offers a contact area at least 1,000 times greater, and a connection that is always strong.

The KERP© system (Kirchhoff's Equal Resistance Path) guarantees the same resistance and the same power supply to all outputs. Internal wiring is of the highest standard: silver-plated, ultra-pure continuous-cast Ohno copper solid core strands offer low resistance and high amperage. A fluorinated ethylene propylene (FEP) helix is ​​wrapped around the conductor before an extruded FEP dielectric protects the conductor and creates a virtual dielectric of air (FDA). This construction offers unmatched performance and provides the ultimate in high performance, low resistance internal power supply systems. In addition, 153'000A instantaneous protection is provided,

The internal wiring of IsoTek products is synergized with the IsoTek range of power cables. A critical but overlooked area is maintaining consistency of design and material properties throughout an audio harness, whether it be signal carrying cables or its power cable network.

V5 Titan also contains a System Link outlet, designed to link multiple units together while maintaining a fixed ground reference, and preserving the need for multiple outlets.

The V5 Titan has a high quality yet highly functional design and is an excellent upgrade to a complete audio system. Also included is IsoTek's award winning Premier Power Cord.

The original Titan, when launched in late 2004, set a new standard for high-current cleaning systems and won the Hi-Fi News Cleaning Product of the Year award in 2005, along with numerous other international awards.

The new V5 model offers an additional third outlet as well as a new "System Link" outlet, which allows multiple IsoTek devices to be connected via a star ground to a single outlet. The legendary Titan Direct Coupled© circuitry has also been taken to a new level with instantaneous absolute power thanks to a more than 50% increase in PCB copper loading, approaching the ideal of zero ohms. This greatly improves amperage and lowers resistance. The new circuit also offers double the inductance with an 80% increase in current handling capacity. The protection also rises to 153'000A instantaneous and 75'000A continuous, it is the most robust surge protection system that IsoTek has offered in this model.

Features:

Suitable for high current audio or AV systems.

RFI reduction 85dB (50 ohms standard), down to 5Hz.

Optimized power cleaning circuitry effectively removes common and differential mode mains noise.

3 independent high current outputs for power amplifiers, subwoofers and active speakers (16A).

Easy replacement RCBO fuse system.

Instant protection of 153,500 A, continuous of 75,000.

Fully grounded star network.

Silver-plated Ohno Continuous Cast copper internal wiring with FEP virtual air dielectric.

SYSTEM LINK socket to expand the outputs and maintain a star ground reference.

Supplied with IsoTek's award winning EVO3 PREMIER power cord.

Specifications:

NUMBER OF OUTPUTS 3 + System Link.

TYPE OF DEPARTURES UK, EU, US, AU & CH.

MAINS INPUT 16A IEC C20.

MAINS VOLTAGE 100-240V / 50-60Hz.

HIGH CURRENT - 230V x3 (16A 3,680W in total).

HIGH CURRENT - 115V x3 (16A 1,840W in total).

SYSTEM LINK x1.

PROTECTION AGAINST OVERVOLTAGES 153,000A.

DIMENSIONS (width x height x depth) 220 x 147 x 350mm.

WEIGHT 12kg.